4WE6R10-6X/EG24N9K4

The 4WE6R10-6X/EG24N9K4 valve belongs to the WE Directional Spool Valves series and is manufactured by Bosch Rexroth for hydraulic automation tasks that require precise flow direction control. It uses a nominal size 6 interface, allowing it to mount directly to subplates that share the ISO 4401-03-02-0-05 porting pattern. The 4-way configuration provides two service ports, a pressure port, and a tank port so actuators can retract or extend under defined pressure paths. During operation the valve accommodates up to 80 l/min of flow while maintaining stable performance. Pressure resistance reaches 350 bar in the P, A, and B lines, while the T port withstands up to 210 bar to protect return circuits from overloads. Proper system hygiene is supported by an oil cleanliness class of ISO 4406 (c) 20/18/15, reducing wear in the metering edges. The housing carries an IP65 protection rating, sealing the solenoid enclosure against dust ingress and low-pressure water jets in industrial environments.

Electrical actuation is delivered by a 24 VDC solenoid that draws a rated current of 1.25 A, resulting in a nominal power consumption of 30 W for energy-efficient cabinet design. Continuous service is possible because the coil is specified for a 100 percent duty cycle, meaning it can remain energized without mandatory cooling pauses. Thermal endurance is enhanced further by insulation class F windings, which tolerate higher operating temperatures without degradation. The valve connects to control wiring through a DIN EN 175301-803 connector coded K4, enabling quick field replacement of cable assemblies. A concealed manual override designated N9 is present, so technicians can shift the spool during commissioning or power loss without exposing moving parts. With both solenoids installed the assembly weighs 1.95 kg, light enough for direct mounting on compact manifolds yet robust enough to resist vibration in mobile or stationary equipment.