Bosch Rexroth | 4WE6M6XEW110N9DK25LV62
4WE6M6X/EW110N9DK25L/V/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6M6X/EW110N9DK25L/V/62 directional spool valve is produced by Bosch Rexroth for the WE Directional Spool Valves series and is intended to switch hydraulic flow in automated machinery. The solenoid coil operates on 110 VAC at 50 or 60 Hz so it can be tied directly to plant mains, and a voltage tolerance of ±10 % keeps the valve functional during supply fluctuations. A duty cycle of 100 % ED permits the coil to remain energized continuously, while an inrush demand of 220 VA and a holding requirement of 50 VA define the electrical load profile during actuation and steady state. Insulation class H enables the winding to handle elevated temperatures, and the coil surface may reach 120 °C without degrading materials. A 5-pole Mini-Change connector speeds installation, and the IP65 rating prevents dust ingress and low-pressure water jets from affecting operation.
Nominal size 6 establishes the port cross-section and fits manifolds designed for compact flow passages. The valve carries a maximum flow capacity of 60 l/min so actuator speeds remain consistent at moderate demand, and ports P, A, and B tolerate up to 350 bar for high-pressure circuits. The tank port is limited to 160 bar to protect return piping and reservoir components. A concealed manual override lets technicians shift the spool during setup without exposing moving parts. The interface follows NFPA T3.5.1 D03, providing alignment with common North American stack systems, while the mounting pattern ISO 4401-03-02-0-05 ensures compatibility with international subplates. This combination of size, pressure, and standardized mounting minimizes pressure drop and simplifies replacement during maintenance.
Technical Specifications
Coil Voltage
110 VAC (50/60 Hz)
Duty Cycle
100% ED
Electrical Connection
5-Pole Mini-Change
Holding Power (ac)
50 VA
Inrush Power (ac)
220 VA
Insulation Class (ac)
H
Interface Standard
NFPA T3.5.1 D03
Manual Override
Concealed
Max Flow (ac)
60 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (ac)
160 bar
Maximum Coil Surface Temp (ac)
120 °C
Mounting Interface
ISO 4401-03-02-0-05
Nominal Size
6
Protection Rating
IP65
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
