1-888-551-3082 | 1-919-443-0207 | sales@hydraulicpartsusa.com
You will get an email confirming we have received your inquiry.
A team member will review your request and be in touch concerning any questions or specifications.
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6M6X/EW110N9DAL/B12 valve is produced by Bosch Rexroth for the WE Directional Spool Valves series and is intended to route hydraulic flow to cylinders or motors in automated machinery. Its nominal size 6 footprint suits compact subplates, while the ISO 4401-03-02-0-05 (NFPA D03) porting pattern aligns with standard manifolds for straightforward mounting. Ports P, A, and B tolerate up to 350 bar, so the unit works in high-pressure circuits, and the tank port is limited to 160 bar to safeguard return plumbing. A maximum flow capacity of 60 l/min supports medium-duty actuators, and a 1.2 mm throttle insert in port P moderates inrush flow to improve motion control. The enclosure carries an IP65 protection class, giving resistance to dust and directed water, and the solenoid is rated for a 100 percent duty cycle, allowing continuous energization without overheating.
The coil is designed for 110 V AC on either 50 or 60 Hz supplies, enabling use in plants with different mains frequencies. It draws 0.52 A at 50 Hz and 0.39 A at 60 Hz, figures that guide fuse sizing and transformer selection. Switch-on power is 220 VA to create the initial magnetic force, after which holding power falls to 50 VA to cut energy consumption and heat rise. Electrical entry is through a 1/2-14 NPT cable gland, giving a sealed interface for armored conduit. A concealed N9 manual override lets maintenance staff shift the spool mechanically when electrical power is unavailable, preventing downtime during commissioning or troubleshooting.
Duty Cycle
100% ED
Electrical Connection
Cable Gland 1/2"-14 NPT
Holding Power (ac)
50 VA
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure (p, A, B)
350 bar
Nominal Size
6
Nominal Voltage (ac)
110 V 50/60 Hz
Porting Pattern
ISO 4401-03-02-0-05 (NFPA D03)
Protection Class (ip)
IP65
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Switch-on Power (ac)
220 VA
Tank Port Max Pressure (ac)
160 bar
Throttle Insert
Port P Ø1.2 mm
Worldwide Shipping with FedEx and UPS.
We accept all major credit cards
1 year Hydraulic Parts USA warranty on ALL products
We are a Better Business Bureau A+ business