Bosch Rexroth | 4WE6M6XEW110N9DAL62-CSA
4WE6M6X/EW110N9DAL/62 CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6M6X/EW110N9DAL/62 CSA directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series. It shifts hydraulic flow between actuator ports in automated systems. Valve size 6 defines the nominal passage and supports a maximum flow of 60 l/min, allowing moderate-volume circuits to run without undue pressure loss. The ISO 4401-03-02-0-05 mounting interface bolts to standard subplates, and NFPA size D03 provides the same footprint in North American layouts. Working ports p, a, and b tolerate 350 bar, while the tank port t is limited to 160 bar for safe return-line service. A solenoid wound for 110 V AC at 50 or 60 Hz permits direct connection to common control supplies, and on a 50 Hz line the coil draws 0.34 A, a figure used to choose fuses and contactors.
When supplied from 60 Hz mains the coil current rises to 0.39 A, and the circuit must deliver 220 VA at switch-on before settling to a 50 VA holding load that keeps temperature rise low. A 100 % ED duty rating allows the valve to remain energized continuously without scheduled cool-down periods. Wiring enters through a 1/2-14 NPT cable gland that seals the enclosure, and an IP65 protection class confirms resistance to dust and water jets. A concealed N9 manual override lets technicians shift the spool during commissioning or power loss while preventing accidental actuation. Accurate alignment on the manifold is ensured by an ISO 8752-3x8-St locating pin. Together these characteristics support reliable, sealed, and continuously rated operation in hydraulic automation.
Technical Specifications
Coil Voltage
110 V AC (50/60 Hz)
Duty Cycle
100% ED
Electrical Connection
1/2-14 NPT Cable Gland
Holding Power
50 VA
Locating Hole And Pin
ISO 8752-3x8-St
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Pressure (p,a,b)
350 bar
Max Pressure (t)
160 bar
Mounting Interface
ISO 4401-03-02-0-05
Nfpa Size
D03
Protection Class
IP65
Rated Current (50 Hz)
0.34 A
Rated Current (60 Hz)
0.39 A
Switch-on Power
220 VA
Valve Size
6
1620 Old Apex Road
Shipping & Payment Options
