Bosch Rexroth | 4WE6L6XEW110N9DAL62
4WE6L6X/EW110N9DAL/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6L6X/EW110N9DAL/62 valve is produced by Bosch Rexroth as part of the WE Directional Spool Valves series. It directs hydraulic flow in automation circuits and is built on nominal size 6 for compact manifolds. The mounting surface follows the NFPA D03 interface, and the porting pattern corresponds to ISO 4401-03-02-0-05 to fit standardized subplates. A maximum operating pressure of 350 bar permits use in high-pressure systems, while the spool passages support up to 60 l/min when powered by an AC solenoid. Continuous service is possible because the coil carries a 100 percent duty rating in S1 classification. The body is sealed to IP65 so installations can be placed in wet industrial areas. A locating hole equipped with a locking pin according to ISO 8752-3×8-St simplifies accurate alignment during assembly.
Electrical features begin with a rated supply of 110 V AC at 50 or 60 Hz, and the circuit tolerates a ±10 percent voltage deviation. The coil demands 220 VA during switch-on and then drops to a holding power of 50 VA. Conductors are brought in through a 1/2-14 NPT cable gland designated DAL, which seals the entry against contaminants. A concealed manual override, marked N9, allows mechanical actuation when power is unavailable, and this function is permitted up to 50 bar tank pressure. These elements complete the valve’s electrical interface and give maintenance staff a direct fallback method without disassembling the unit.
Technical Specifications
Duty Cycle
100% ED (S1)
Electrical Connection
Cable Gland 1/2"-14 NPT (DAL)
Holding Power
50 VA
Ingress Protection
IP65
Locating Hole
With Locking Pin (ISO 8752-3x8-St)
Manual Override
Concealed (N9)
Manual Override Max Tank Pressure
50 bar
Max Flow
60 l/min (AC)
Max Operating Pressure
350 bar
Mounting Interface
NFPA D03
Nominal Size
6
Porting Pattern
ISO 4401-03-02-0-05
Rated Voltage
110 V AC (50/60 Hz)
Switch-on Power
220 VA
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
