Bosch Rexroth | 4WE6L6XEG24N9DK35L
4WE6L6X/EG24N9DK35L
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6L6X/EG24N9DK35L valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and is used to shift flow paths in hydraulic automation systems. Its porting pattern conforms to ISO 4401-03-02-0-05, allowing direct installation on standard subplates, while the NFPA mounting size D03 matches common manifold footprints. The valve tolerates 350 bar on ports P, A, and B so it can operate in high-pressure circuits, and the tank port withstands 210 bar to handle elevated return pressures. Maximum flow under direct-current actuation reaches 80 l/min, covering medium flow demands. A nominal supply of 24 V DC powers the solenoid, with a ±10 % voltage window to keep performance stable when supply levels vary. At rated voltage the coil draws 1.25 A, giving designers a fixed current figure for power budgeting.
The electrical load is defined by a nominal power of 30 W, and a 100 % duty cycle allows the solenoid to remain energized continuously without forced cooling. Coil surface temperature is limited to 120 °C to protect windings that use insulation class F materials. An IP65 protection rating seals the enclosure against dust ingress and low-pressure water jets, making the valve suitable for exposed machine areas. Fluid cleanliness must meet ISO 4406 20/18/15 so the spool can shift reliably without sticking, and NBR seals provide compatibility with customary mineral hydraulic oils. The valve can switch up to once per second in the DK35L damping configuration, supporting moderate cycling tasks in automated equipment.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Coil Surface Temperature
120 °C Max
Duty Cycle
100% ED
Insulation Class (dc)
F
Max Flow (dc)
80 l/min
Max Operating Pressure (p,a,b)
350 bar
Max Switching Frequency (dk35l)
1 1/s
Max Tank Port Pressure (t, Dc)
210 bar
Nfpa Mounting Size
D03
Nominal Current (24 V)
1.25 A
Nominal Power
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Seal Material
NBR
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
