Bosch Rexroth | 4WE6L42B6XEG24K4QM0G24
4WE6L42B6X/EG24K4QM0G24
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6L42B6X/EG24K4QM0G24 directional spool valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and is used to route hydraulic flow in automated machinery. A porting pattern of ISO 4401-03-02-0-05 allows direct mounting on common subplates, while the NFPA D03 interface aligns with North American manifold layouts. The unit withstands 350 bar on pressure, service, and pump ports and 210 bar on the tank port, supporting high-pressure circuits. A maximum flow rate of 80 l/min lets the valve handle medium throughput without excessive pressure loss. It can be installed in any orientation, simplifying layout inside power units or on machine frames. An IP65 protection class keeps internal components sealed against dust and low-pressure water jets, and the K4 electrical connector following DIN EN 175301-803 provides a standardized plug for field wiring.
The solenoid coil draws 30 W, so heat generation remains moderate during continuous duty. A 100 % ED duty cycle permits uninterrupted actuation, and insulation class F prevents thermal damage under rated conditions. The coil operates on a nominal 24 V DC supply, drawing 1.25 A at that voltage; the circuit may vary by ±10 % without impacting function. When the valve is de-energized, a switch-off overvoltage of up to 500 V can appear across the coil, so suppression devices should be considered in sensitive control cabinets. Long-term reliability is denoted by an MTTFd of 300 years, indicating very low probability of dangerous failure within typical service life.
Technical Specifications
Coil Power
30 W
Duty Cycle
100% ED
Electrical Connector
K4 (DIN EN 175301-803)
Installation Position
Any
Insulation Class (dc)
F
Max Flow (dc)
80 l/min
Max Operating Pressure (a/b/p)
350 bar
Max Switch-off Overvoltage
500 V
Max Tank Port Pressure (t)
210 bar
Mttfd
300 years
Nfpa Mounting Interface
D03
Nominal Voltage (solenoid)
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Protection Class (en 60529)
IP65
Rated Current (24 V Dc)
1.25 A
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
