Bosch Rexroth | 4WE6JB6XEG24N9DK25L62-CSA
4WE6JB6X/EG24N9DK25L/62 CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6JB6X/EG24N9DK25L/62 CSA directional spool valve belongs to the WE Directional Spool Valves series and is manufactured by Bosch Rexroth for hydraulic automation tasks requiring precise on-off control of actuator flow. The J spool symbol defines the internal flow paths and switching positions, while size 6 establishes the port pitch and overall envelope of the unit. An ISO 4401-03-02-0-05 (NFPA D03) mounting interface lets the valve fit common subplate patterns used in industrial manifolds. It handles up to 350 bar at ports A, B, and P, and tolerates 210 bar at the tank port to protect return-line components. A maximum direct current flow of 80 l/min supports medium throughput circuits. The detachable wet-pin solenoid design allows oil-immersed armatures to dissipate heat and be replaced without disturbing hydraulic plumbing, and the coils are driven by a 24 V DC supply to match standard machine power rails.
A rated coil current of 1.25 A defines the electrical load placed on control cabinets, and insulation class F materials permit continuous operation when winding temperatures rise. The coil surface may reach 120 °C without damage, enabling reliable duty cycles under high ambient or oil temperatures. A DK25L five-pole connector provides plug-in electrical termination for quick maintenance. IP65 sealing guards internal parts from dust ingress and water jets during wash-down service. A concealed N9 manual override allows local shifting when power is unavailable while remaining protected against accidental actuation. The ISO 8752-3×8 locating hole, noted as /62, aligns the housing on the subplate for repeatable assembly. With two solenoids installed, the valve weighs 1.95 kg, a factor considered when selecting mounting hardware.
Technical Specifications
Coil Insulation Class
F
Coil Rated Current
1.25 A
Electrical Connector
DK25L (5-Pole)
Ingress Protection
IP65
Locating Hole
ISO 8752-3x8 (/62)
Manual Override
N9 (Concealed)
Max Coil Surface Temperature
120 C
Max Flow (dc)
80 l/min
Max Operating Pressure (a/b/p)
350 bar
Max Tank Port Pressure (dc)
210 bar
Mounting Interface
ISO 4401-03-02-0-05 (NFPA D03)
Nominal Voltage
24 V DC
Size
6
Solenoid Type
Wet-Pin (Detachable)
Spool Symbol
J
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
