4WE6JA6X/EW110N9K4QM0G24/V

The 4WE6JA6X/EW110N9K4QM0G24/V directional spool valve belongs to the WE Directional Spool Valves series and is produced by Bosch Rexroth for controlling hydraulic actuator movement. An AC coil rated at 110 V for 50 or 60 Hz supplies the electromagnetic force that shifts the spool. When energized at 50 Hz the coil draws 0.52 A, while operation at 60 Hz lowers the draw to 0.39 A, allowing compatibility with both power frequencies. During initial energization the coil demands 220 VA of switch-on power to overcome static friction in the spool assembly. Once the spool is in position it maintains flow direction with 50 VA of holding power, reducing heat generation during continuous duty. The electromagnetic system supports a 100 % ED duty cycle so the valve can remain energized indefinitely without thermal shutdown. A voltage tolerance of ±10 % prevents malfunction when line supply fluctuates within common industrial limits. The winding insulation is classified as class H, ensuring thermal endurance for the coil during prolonged high-temperature service.

Electrical termination is accomplished through a K4 connector according to DIN EN 175301-803, simplifying coil replacement and field wiring. A concealed N9 manual override lets maintenance personnel shift the spool mechanically when the solenoid is de-energized. The integrated position switch accepts a 24 V DC supply so control circuits can monitor spool status. The hydraulic section tolerates operating pressures up to 350 bar at ports P, A, and B, permitting use in high-pressure circuits. Tank port T withstands 160 bar so return flow remains safely contained. The valve passages accommodate flow rates to 60 l/min, supporting medium-sized actuators without excessive pressure loss. An IP65 protection class shields the solenoid housing against dust and low-pressure water jets, enabling installation in exposed plant areas. FKM seals resist mineral oils and elevated temperatures, extending service life under demanding fluid conditions.