Bosch Rexroth | 4WE6JA6XEW110N9DK25L62
4WE6JA6X/EW110N9DK25L/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6JA6X/EW110N9DK25L/62 directional spool valve is manufactured by Bosch Rexroth within the WE Directional Spool Valves series to route hydraulic flow in automation circuits. Valve size 6 keeps the envelope small for compact power units, while the ISO 4401-03-02-0-05 mounting interface lets the unit bolt directly to standard subplates and shortens installation time. A maximum operating pressure of 350 bar allows use on high-pressure supply lines, and a maximum flow rate of 60 l/min defines the throughput the spool can handle without excessive pressure drop. The solenoids run on 110 V AC at 50 or 60 Hz so they tie into common control power; at 50 Hz each coil draws 0.52 A, and at 60 Hz the draw drops to 0.39 A to ease thermal loading. An inrush requirement of 220 VA shifts the spool quickly, and a 100 % ED duty cycle permits continuous energization for long machine cycles.
An IP65 enclosure protects the coil housing from dust and water jets, enabling service in wash-down zones. The DK25L five-pole connector provides plug-in wiring so maintenance can replace a valve without rewiring. Once actuated, the coil holds the spool with only 50 VA, limiting heat during steady state operation. The tank port tolerates up to 160 bar, preventing damage when return lines are restricted. A concealed N9 manual override lets technicians shift the spool during setup without leaving external levers exposed in service. Total mass of 1.95 kg with both solenoids allows single-handed mounting on manifold blocks. These features complement the flow and pressure limits described earlier to give system builders a reliable component for demanding hydraulic automation tasks.
Technical Specifications
Duty Cycle
100% ED
Electrical Connection
DK25L (5-pole)
Enclosure Rating
IP65
Holding Power
50 VA
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure
350 bar
Max Tank Port Pressure (ac)
160 bar
Mounting Interface
ISO 4401-03-02-0-05
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Rated Voltage
110 V AC (50/60 Hz)
Switch-on Power
220 VA
Valve Size
6
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
