Bosch Rexroth | 4WE6JA6XEG24N9K72L
4WE6JA6X/EG24N9K72L
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6JA6X/EG24N9K72L valve belongs to Bosch Rexroth's WE Directional Spool Valves series and directs oil flow in automated hydraulic circuits. It runs on 24 V DC and draws 1.25 A, letting control systems power it from standard SELV supplies. A wet-pin, detachable coil solenoid simplifies maintenance while keeping heat in the hydraulic fluid. Wiring is completed through an M12x1 four-pole K72L connector, and Protection Class III under VDE 0580 confirms use in low-voltage environments. The coil insulation is protected against induced spikes by a 500 V maximum switch-off overvoltage rating. Dust-tight, water-jet resistance is provided by an IP65 enclosure, and system oil must meet ISO 4406 20/18/15 cleanliness to preserve spool accuracy. Mounting uses the NFPA D03 interface with the ISO 4401-03-02-0-05 porting pattern, ensuring interchangeability with common sub-plates.
The valve carries a continuous flow capacity of 80 l/min and tolerates 350 bar at ports P, A, and B, fitting medium-pressure cylinders and motors. The tank port withstands 210 bar, so back-pressure spikes do not damage seals. A concealed N9 manual override lets technicians shift the spool without electrical power, and its function is limited to 50 bar on the tank side for safety. The unit may be installed in any position, simplifying manifold layout in confined power packs. The IP65 envelope remains effective regardless of orientation, and the wet-pin design helps purge trapped air when the valve is mounted horizontally, maintaining consistent actuation under changing flow rates.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Electrical Connector
M12x1 4-Pole (K72L)
Ingress Protection (ip)
IP65
Installation Position
Any
Manual Override Tank Limit
50 bar
Manual Override Type
Concealed (N9)
Max Switch-off Overvoltage
500 V
Maximum Flow (dc)
80 l/min
Maximum Operating Pressure (p/a/b)
350 bar
Maximum Tank Port Pressure (dc)
210 bar
Nfpa Mounting Interface
D03
Porting Pattern
ISO 4401-03-02-0-05
Protection Class (vde 0580)
III
Rated Current (g24)
1.25 A
Rated Voltage
24 V DC
Solenoid Type
Wet-Pin, Detachable Coil
1620 Old Apex Road
Shipping & Payment Options
