Bosch Rexroth | 4WE6JA6XEG24N9K4QM0G24
4WE6JA6X/EG24N9K4QM0G24
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6JA6X/EG24N9K4QM0G24 valve belongs to the WE Directional Spool Valves series and is produced by Bosch Rexroth for hydraulic automation that requires precise flow direction. It runs on a rated solenoid voltage of 24 V DC, and the coil draws 1.25 A so power supplies can be sized correctly. Continuous service is possible because the duty cycle is 100 % ED, preventing thermal overload during long actuation periods. The spool carries symbol J, defining the internal flow paths needed for four-way control. Mineral oil conforming to DIN 51524 is the specified hydraulic fluid, which maintains seal integrity and lubrication. Ports P, A, and B tolerate pressures up to 350 bar, while the tank port t is limited to 210 bar to protect return lines. The valve supports a maximum flow of 80 l/min, setting the upper limit for actuator speed in the circuit.
The mounting face follows porting pattern ISO 4401-03-02-0-05, allowing direct replacement of other NG6 components. Electrical connection is made through a K4 connector compliant with DIN EN 175301-803, and the housing meets protection class IP65 to block dust and water jets. Position monitoring is provided by the QM0 feature, which signals when the spool rests in its neutral position for safety interlocks. A concealed N9 manual override lets technicians shift the spool during commissioning or power loss. Hydraulic cleanliness must reach ISO 4406 20/18/15 to avoid spool sticking and wear. The valve can switch up to 4.2 times per second, giving control loops the responsiveness required for rapid cycling actuators. Each solenoid adds only 1.45 kg to the assembly, keeping manifold weight low.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Connector Type
K4 (DIN EN 175301-803)
Duty Cycle
100% ED
Hydraulic Fluid
Mineral Oil (DIN 51524)
Manual Override
N9 (Concealed)
Max Operating Pressure (p, A, B)
350 bar
Max Switching Frequency (dc)
4.2 1/s
Max Tank Port Pressure (t)
210 bar
Maximum Flow (dc)
80 l/min
Porting Pattern
ISO 4401-03-02-0-05
Position Monitoring
QM0 (Rest Position)
Protection Class
IP65
Rated Current (24 V Dc)
1.25 A
Rated Voltage (solenoid)
24 V DC
Spool Symbol
J
Weight (one Solenoid)
1.45 kg
1620 Old Apex Road
Shipping & Payment Options
