Bosch Rexroth | 4WE6J73-6XEG96N9K4A12
4WE6J73-6X/EG96N9K4/A12
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J73-6X/EG96N9K4/A12 valve is produced by Bosch Rexroth in the WE Directional Spool Valves series. Designed to shift hydraulic flow paths in automation circuits, it relies on a rated voltage of 96 V DC so it pairs with high-voltage control panels. A rated current of 0.33 A keeps coil heating low, while the nominal power draw of 30 W gives predictable load sizing for power supplies. The coil can remain energized continuously because the duty cycle is 100 % ED, preventing performance loss during long machine cycles. A DIN EN 175301-803 electrical connector standardizes wiring and simplifies field replacement. The housing meets IP65, allowing installation in wash-down or dusty areas without water ingress. It mounts on sub-plates that follow ISO 4401-03-02-0-05, ensuring compatibility with common CETOP 3 manifolds. With two solenoids fitted, the assembly weighs 1.95 kg which helps keep manifold blocks light.
In service, the valve passes up to 80 l/min, matching medium-flow actuators in presses or handling stations. It withstands 350 bar on ports A, B, and P, so high-pressure pumps can be used without external relief devices, and the tank port is limited to 210 bar to protect return lines. A switching frequency of 4.2 cycles per second supports rapid directional changes in servo-like duties, and an enabled switching time increase function smooths transitions when shock reduction is required. During de-energization the coil can generate up to 500 V; therefore a suppressor rated at 192 V is recommended to protect drive electronics. A concealed manual override lets maintenance staff shift the spool during power loss without exposing the operator to moving parts. These pressure, flow, and actuation features combine to give predictable control response in automated hydraulic systems.
Technical Specifications
Duty Cycle
100% ED
Electrical Connector
DIN EN 175301-803
Manual Override
Concealed
Max Flow (dc)
80 l/min
Max Operating Pressure (a/b/p)
350 bar
Max Switch-off Overvoltage
500 V
Max Switching Frequency (dc)
4.2 1/s
Max Tank Port Pressure (dc)
210 bar
Mounting Interface
ISO 4401-03-02-0-05
Nominal Power (dc)
30 W
Protection Class (ip)
IP65
Rated Current (96 V Dc)
0.33 A
Rated Voltage
96 V DC
Recommended Suppressor Voltage
192 V
Switching Time Increase
Enabled
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
