Bosch Rexroth | 4WE6J73-6XEG24N9DK25L62
4WE6J73-6X/EG24N9DK25L/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J73-6X/EG24N9DK25L/62 directional spool valve belongs to the WE Directional Spool Valves series and is manufactured by Bosch Rexroth for hydraulic automation tasks that require compact flow control. Its nominal size of 6 matches NG06 subplates, and four main ports provide the standard P, A, B, and T flow paths. A high-power wet-pin solenoid applies force to shift the spool, while a 24 V DC coil operating at 1.25 A suits common machine power rails. The DK25L five-pole mini-change connector speeds installation and removal in modular manifolds, and the body aligns on the subplate with an ISO 8752-3×8-St locating pin to maintain seal integrity. The housing meets IP65, guarding the electrical parts from dust and water jets, and the coil surface temperature may reach 120 °C before thermal limits are approached. With two solenoids installed, the valve weighs 1.95 kg, allowing single-handed placement during service.
A concealed N9 manual override lets maintenance personnel shift the spool without power, and it can be used safely as long as tank pressure stays below 50 bar. The flow gallery accommodates up to 80 l/min of direct-current flow, and ports A, B, and P withstand continuous service at 350 bar, supporting high-pressure circuits in presses or mobile equipment. The T port is rated for 210 bar, defining the maximum back-pressure the return line can tolerate. When the coil is de-energized the circuit driver must limit switch-off overvoltage to 500 V to avoid insulation stress. These limits, combined with the mini size and wet-pin actuation, allow the valve to deliver precise, repeatable spool shifts in densely packed hydraulic manifolds.
Technical Specifications
Coil Surface Temperature Max
120 °C
Electrical Connection
DK25L (5-Pole Mini-Change)
Locating Hole And Pin
ISO 8752-3x8-St
Main Ports
4
Manual Override
Concealed (N9)
Manual Override Tank Pressure Max
50 bar
Max Flow (dc, Standard)
80 l/min
Max Operating Pressure (a/b/p)
350 bar
Max Switch-off Overvoltage
500 V
Nominal Size
6
Nominal Voltage
24 V DC
Protection Class
IP65
Rated Current (g24)
1.25 A
Solenoid Type
High-Power Wet-Pin
Tank Port Max Pressure (dc)
210 bar
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
