Bosch Rexroth | 4WE6J73-6XEG24N9DK24L2A1262
4WE6J73-6X/EG24N9DK24L2/A12/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J73-6X/EG24N9DK24L2/A12/62 valve is produced by Bosch Rexroth within the WE Directional Spool Valves series and directs hydraulic flow in automated systems. It operates on a nominal voltage of 24 V DC to match common machine control supplies. The coil draws a nominal power of 30 W, ensuring reliable actuation without excessive heat. Voltage tolerance of ±10 % allows the solenoid to cope with supply fluctuations. A continuous duty cycle rated at 100 % (S1) keeps the valve energized indefinitely when required by the process. Electrical connection is made through a DK24L M12×1 four-pole plug so wiring is quick and standardized. This connector carries an IP65 rating, which protects the contacts against dust and low-pressure water jets in factory environments. The assembly meets VDE protection class III, limiting its supply to safety extra-low voltage circuits.
The valve installs on a subplate that follows the NFPA T3.5.1 D03 mounting interface, aligning with industry-standard manifolds. Its porting pattern corresponds to ISO 4401-03-02-0-05 so passageways match existing hydraulic blocks. A locating hole and ISO 8752-3×8-St pin secure the housing against movement during rapid cycling. The concealed manual override allows technicians to shift the spool locally while keeping the mechanism protected from dirt. This override can be used only when tank pressure is below 50 bar to avoid component damage. The unit switches up to 4.2 times per second in direct-current service to support fast directional changes. It accommodates flows up to 80 l/min so medium-sized actuators receive adequate oil volume. Channels A, B, and P withstand operating pressures to 350 bar, enabling use in high-pressure circuits. The tank port on side D is limited to 210 bar, protecting return lines from overloading.
Technical Specifications
Connector Type
DK24L (M12x1, 4-pole)
Duty Cycle
100% (S1)
Ip Rating (connector Dk24l)
IP65
Locating Hole And Pin
ISO 8752-3x8-St
Manual Override Tank Pressure Limit
50 bar
Manual Override Type
Concealed
Max Switching Frequency (dc)
4.2 1/s
Maximum Flow (dc)
80 l/min
Maximum Operating Pressure (a/b/p)
350 bar
Maximum Tank Port Pressure (dc)
210 bar
Mounting Interface
NFPA T3.5.1 D03
Nominal Power (dc)
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Vde Protection Class
III
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
