1-888-551-3082 | 1-919-443-0207 | sales@hydraulicpartsusa.com
You will get an email confirming we have received your inquiry.
A team member will review your request and be in touch concerning any questions or specifications.
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J73-6X/EG12N9K40/A12SO43A-1799A valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and directs hydraulic flow in automated equipment. It is built in size 6 and follows the ISO 4401-03-02-0-05 porting pattern for manifold mounting. The hydraulic section withstands operating pressures up to 350 bar, while the tank port tolerates 210 bar during direct-current switching. Flow capacity reaches 80 l/min under those same conditions. Consistent behavior is achieved with fluids that remain between 2.8 and 500 mm²/s in viscosity and -20 to +80 °C in temperature.
The integrated solenoid coil is rated for 12 V DC and draws 2.5 A through a Deutsch DT04-2PA two-pin connector. IP69K ingress protection shields the housing against high-pressure water and dust, and a concealed N9 manual override allows spool actuation without power. Option A12 provides an extended switching time for smoother transitions. The assembly must operate with oil cleanliness no worse than ISO 4406 class 20/18/15 to avoid premature wear. Total mass is 1.95 kg, which simplifies installation and service.
Cleanliness Class
ISO 4406 20/18/15
Coil Nominal Voltage
12 VDC
Coil Rated Current
2.5 A
Electrical Connection
Deutsch DT04-2PA (2-pin)
Hydraulic Fluid Temp Range
-20 to +80 C
Ingress Protection
IP69K
Manual Override
Concealed (N9)
Max Operating Pressure
350 bar
Maximum Flow (dc)
80 l/min
Porting Pattern
ISO 4401-03-02-0-05
Size
6
Switching Time Increase
A12
Tank Port Max Pressure (dc)
210 bar
Viscosity Range
2.8 to 500 mm²/s
Weight
1.95 kg
Worldwide Shipping with FedEx and UPS.
We accept all major credit cards
1 year Hydraulic Parts USA warranty on ALL products
We are a Better Business Bureau A+ business