Bosch Rexroth | 4WE6J6XEW230N9K4B10V
4WE6J6X/EW230N9K4/B10V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW230N9K4/B10V valve belongs to the WE Directional Spool Valves series produced by Bosch Rexroth for controlling actuator motion in hydraulic automation circuits. The solenoid is rated for 230 V AC at 50/60 Hz so it connects directly to standard mains supplies, and it draws 0.16 A under steady conditions to limit panel fuse requirements. A switch-on power demand of 220 VA covers the inrush needed to shift the spool, after which the coil settles to a holding power of 50 VA to reduce heat generation. The electrical interface follows DIN EN 175301-803 Form A, allowing quick plug mounting with common field connectors. An IP65 protection class shields the housing against dust and water jets, making the valve suitable for exposed machine zones. The mounting face complies with NFPA T3.5.1 D03, while the porting pattern matches ISO 4401-03-02-0-05 so the unit can be installed on either international or North American subplates without adapters.
A 100 % duty cycle permits continuous energization without exceeding the coil temperature limit. The pressure rating reaches 350 bar on ports a, b, and p, enabling use in high-pressure circuits, and the tank port withstands up to 160 bar so back-pressure in the return line will not damage internal seals. Maximum flow of 60 l/min defines the volume that can pass without excessive pressure drop, and a switching frequency of 2 cycles per second sets the upper limit for rapid directional changes. A 1.0 mm throttle orifice in port p meters pilot flow to damp spool movement and prevent shock during shifts. FKM seals provide chemical resistance to a wide range of hydraulic oils, including those with higher temperatures. The assembly weighs 1.95 kg, allowing single-person handling during installation or maintenance.
Technical Specifications
Duty Cycle
100%
Electrical Connection
DIN EN 175301-803 (Form A)
Holding Power (ac)
50 VA
Max Operating Pressure (a/b/p)
350 bar
Max Tank Port Pressure (ac)
160 bar
Maximum Flow (ac)
60 l/min
Maximum Switching Frequency (ac)
2 1/s
Nfpa Interface
NFPA T3.5.1 D03
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Rated Current (50 Hz)
0.16 A
Rated Voltage
230 V AC (50/60 Hz)
Seal Material
FKM
Switch-on Power (ac)
220 VA
Throttle Orifice (p)
1.0 mm
Weight
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
