Bosch Rexroth | 4WE6J6XEW127N9DAV62SO43A-1042
4WE6J6X/EW127N9DA/V/62SO43A-1042
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW127N9DA/V/62SO43A-1042 directional spool valve is manufactured by Bosch Rexroth within the WE Directional Spool Valves series. It directs hydraulic flow to actuators in automated equipment and supports repeatable switching in closed loop systems. The valve size is 6, giving a compact envelope suited to manifold banks with moderate flow rates. A wet-pin, detachable coil solenoid drives the spool, so the coil can be replaced without opening the pressure boundary. Switch-on power of 220 VA enables rapid force build-up, while the holding power is limited to 50 VA to reduce heat during continuous energization. The design passes up to 60 l/min, satisfying medium-duty circuit requirements, and withstands operating pressures up to 350 bar for high force cylinders. Continuous service is possible because the duty cycle is 100 percent (S1). Any installation position can be chosen, simplifying layout inside machine frames.
Return-line capability is defined by a maximum port T pressure of 160 bar, preventing back-pressure from compromising spool movement. Fluid cleanliness must meet ISO 4406 class 20/18/15 to protect the precision-ground lands. The porting pattern follows ISO 4401-03-02-0-05, and an NFPA D03 interface aligns the valve with widely used subplates, allowing interchange with other D03 devices. FKM seals resist high temperature mineral oils and many synthetic fluids, maintaining leakage control over long duty periods. A concealed manual override lets technicians shift the spool during setup or in the event of coil loss without exposing moving parts. Positioning on the manifold is aided by the ISO 8752-3×8-St locating hole, ensuring repeatable alignment of pressure ports. With two solenoids fitted, the assembly weighs 1.95 kg, which supports single-person handling during maintenance.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Duty Cycle
100% (S1)
Holding Power (ac)
50 VA
Installation Position
Any
Locating Hole
ISO 8752-3x8-St
Manual Override
Concealed
Max Flow (ac)
60 l/min
Max Operating Pressure
350 bar
Max Port T Pressure (ac)
160 bar
Nfpa Interface
D03
Porting Pattern
ISO 4401-03-02-0-05
Seal Material
FKM
Solenoid Type
Wet-Pin, Detachable Coil
Switch-on Power (ac)
220 VA
Valve Size
6
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
