Bosch Rexroth | 4WE6J6XEW110N9K4N08V62-CSA
4WE6J6X/EW110N9K4/N08V/62 CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9K4/N08V/62 CSA valve is built by Bosch Rexroth for the WE Directional Spool Valves series. It directs hydraulic flow in automated circuits and is sized for NG6 subplate mounting. The unit tolerates system pressures up to 350 bar at ports A, B, and P, allowing it to handle high-pressure supply lines. Tank return can reach 160 bar so back-pressure in t does not compromise function. A maximum flow of 60 l/min supports medium-capacity actuators without excessive pressure drop. The porting pattern follows ISO 4401-03-02-0-05, simplifying installation on standard D03 manifolds. Spool type J defines the flow paths that create a closed center in the neutral position. An included throttle insert of 0.8 mm in channels A and B moderates pilot oil to prevent dynamic shocks. Electrically, the solenoid operates on 110 V AC, and an inrush demand of 220 VA ensures rapid magnetic force for reliable shifting.
During steady state the coil draws 0.52 A at 50 Hz, limiting heat rise and easing power supply sizing. Holding power is 50 VA, so energy consumption drops once the armature is seated. Class H insulation protects the winding and permits continuous service even when the surface reaches 120 °C. A DIN EN 175301-803 plug coded K4 provides a detachable connection that matches common machine harnesses. The manual override is concealed, allowing emergency actuation while guarding against accidental operation. An IP65 enclosure keeps dust and water jets from reaching internal parts in typical industrial wash-down zones. FKM seals resist mineral oil, synthetic fluids, and elevated temperature, extending service life. Together these electrical and mechanical features make the valve suited for dependable motion control in automated hydraulic equipment.
Technical Specifications
Coil Insulation Class
H
Coil Max Surface Temperature
120 °C
Connector Type
DIN EN 175301-803 (K4)
Holding Power
50 VA
Ingress Protection
IP65
Manual Override
Concealed
Max Flow (ac)
60 l/min
Max Operating Pressure (a, B, P)
350 bar
Max Tank Port Pressure (t)
160 bar
Nominal Voltage
110 V AC
Porting Pattern
ISO 4401-03-02-0-05 (D03)
Rated Current (50 Hz)
0.52 A
Seal Material
FKM
Spool Symbol
J
Switch-on Power
220 VA
Throttle Insert (a, B)
Ø0.8 mm
1620 Old Apex Road
Shipping & Payment Options
