Bosch Rexroth | 4WE6J6XEW110N9DLB10
4WE6J6X/EW110N9DL/B10
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DL/B10 valve is built by Bosch Rexroth for the WE Directional Spool Valves series and directs hydraulic flow between actuator ports in automated machinery. It is supplied in size 6 to match the ISO 4401-03-02-0-05 mounting pattern, so installation aligns with standard subplates. The solenoid coil is rated for a nominal 110 V AC at 50/60 Hz and remains functional within a ±10 % voltage band, supporting global power lines. Switch-on power reaches 220 VA to shift the spool, while steady holding power drops to 50 VA to limit heat during long energization. A cable gland with an integrated light forms the electrical connection and provides visual status during commissioning. Continuous operation is supported by a 100 % ED duty cycle, allowing the unit to stay energized without a cooling pause. Protection to IP65 prevents dust ingress and water jets, and a concealed manual override lets technicians shift the spool during testing without exposing moving parts.
Hydraulic performance is capped at a maximum flow of 60 l/min, enabling medium-size actuators to move at regulated speed. Work ports A, B, and P withstand pressures up to 350 bar, while the tank port T is limited to 160 bar to safeguard return lines. A 1.0 mm throttle orifice in port P stabilizes pilot flow and dampens pressure surges when the spool changes position. NBR seals confine mineral oil and resist the temperatures typical of industrial power units. The cleanliness requirement corresponds to ISO 4406 class 20/18/15, meaning upstream filtration must remove particles that could score the spool or jam the lands. All these parameters combine to keep directional control accurate and repeatable across continuous duty cycles in hydraulic automation systems.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Duty Cycle
100% ED
Electrical Connection
Cable Gland With Light
Enclosure Rating
IP65
Holding Power (ac)
50 VA
Manual Override
Concealed
Max Flow (ac)
60 l/min
Max Operating Pressure (a/b/p)
350 bar
Max Tank Port Pressure (t)
160 bar
Nominal Voltage
110 V AC (50/60 Hz)
Porting Pattern
ISO 4401-03-02-0-05
Seal Material
NBR
Size
6
Switch-on Power (ac)
220 VA
Throttle Orifice (port P)
1.0 mm
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
