4WE6J6X/EW110N9DL/62

The 4WE6J6X/EW110N9DL/62 directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series for hydraulic automation circuits. It uses a high-power wet-pin solenoid so that magnetic force remains strong even under continuous oil immersion. The spool designated by symbol J defines the internal flow paths suited to meter fluid between ports as required by standard switching functions. Its nominal size of 6 helps match the mounting interface to compact manifolds without sacrificing flow capacity. A maximum flow of 60 l/min allows the valve to control medium-duty actuators at moderate speeds. The valve withstands operating pressure up to 350 bar, supporting high-pressure systems common in industrial presses or mobile equipment. Port T is limited to 160 bar to protect return-line components from excess back-pressure. The body follows the ISO 4401-03-02-0-05 porting pattern which ensures interchangeability with industry-standard subplates.

The solenoid coil is rated for 110 V AC at 60 Hz, allowing direct connection to North American control transformers. A 100 percent duty cycle permits continuous energization without overheating during long holding periods. Even with full excitation, surface temperature of the coil is limited to 120 °C which prevents damage to adjacent wiring and seals. Power is supplied through a cable gland with an integrated light so maintenance staff can see activation status at a glance. A concealed manual override labeled N9 lets technicians shift the spool during commissioning while reducing the risk of accidental actuation. The locating hole is fitted with a locking pin, option /62, to simplify precise positioning on the manifold block and avoid rotation from vibration. The valve carries an IP65 enclosure rating so internal components stay protected against dust and water jets during wash-down. With two solenoids installed, the assembly weighs 1.95 kg which keeps manifold loads low in densely packed hydraulic power units.