Bosch Rexroth | 4WE6J6XEW110N9DL
4WE6J6X/EW110N9DL
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DL valve is produced by Bosch Rexroth within the WE Directional Spool Valves series for hydraulic automation where electric actuation selects flow paths. It operates on 110 V AC at 50/60 Hz, so it can be connected directly to standard industrial power. A switch-on power demand of 220 VA guarantees the solenoid establishes magnetic force quickly for positive spool transition. Once energized, the holding power drops to 50 VA to limit heat generation and reduce continuous energy use. The rated current is 0.52 A at 50 Hz and 0.39 A at 60 Hz, which defines conductor sizing for the coil circuit. Continuous duty is supported by a 100% ED rating, allowing the valve to remain energized without time limits. Insulation class H is selected to withstand elevated winding temperatures during long operating cycles. The coil surface temperature is permitted up to 120 °C, giving a clear thermal limit for enclosure design.
The valve accommodates flows up to 60 l/min, so circuit designers can size pumps and lines accordingly. Working ports P, A, and B tolerate pressures up to 350 bar, which fits high-pressure hydraulic machines. The tank port T is limited to 160 bar in AC service and must be returned to the reservoir through piping that observes this threshold. A mounting interface defined by ISO 4401-03-02-0-05 ensures interchangeability with standardized subplates. An IP65 protection class keeps dust ingress and water jets from affecting the energized coil in wash-down areas. The unit can be installed in any position, giving flexibility for manifold or line mounting. A concealed manual override allows local actuation without disturbing the electrical connection. With two solenoids the assembly weighs 1.95 kg, which helps when calculating manifold support and handling loads.
Technical Specifications
Duty Cycle
100% ED
Holding Power
50 VA
Installation Position
Any
Insulation Class (ac)
H
Manual Override
Concealed
Max Coil Surface Temp
120 C
Max Flow (ac)
60 l/min
Max Pressure (p,a,b)
350 bar
Max Pressure (t)
160 bar (AC)
Nominal Voltage
110 V AC 50/60 Hz
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Switch-on Power
220 VA
Weight (2 Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
