Bosch Rexroth | 4WE6J6XEW110N9DK25LV62SO43A-1750
4WE6J6X/EW110N9DK25L/V/62SO43A-1750
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DK25L/V/62SO43A-1750 directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series. It directs pressurized fluid between actuator and tank lines in automated hydraulic systems. A porting pattern of ISO 4401-03-02-0-05 matches standard subplates so installation is straightforward. The electromagnetic assembly works on a rated voltage of 110 V AC at 50 or 60 Hz to suit common control supplies. During energization it draws 220 VA at switch-on which accommodates rapid spool movement. Once shifted it maintains position with a holding power of 50 VA, reducing heat and energy use. Current demand is 0.52 A at 50 Hz and 0.39 A at 60 Hz, parameters that guide fuse and relay selection. Electrical connection is made through a DK25L five-pole plug, providing secure and coded wiring. A 100 % ED duty cycle permits continuous coil energization without thermal derating.
The hydraulic section tolerates a maximum operating pressure of 350 bar on pressure and work ports, allowing use in high-pressure circuits. It passes up to 60 l/min of flow, a capacity suitable for medium-sized actuators. The tank port withstands 160 bar so backpressure in return lines remains within safe limits. A switching frequency up to two cycles per second supports moderate on-off control without excessive wear. With an IP65 enclosure the solenoid housing resists dust ingress and low-pressure water jets for reliable outdoor service. FKM seals provide chemical and temperature resistance for aggressive hydraulic fluids. A concealed manual override identified by code N9 enables emergency spool actuation while protecting against accidental operation. The assembly with two solenoids weighs 1.95 kg, facilitating installation on compact manifolds.
Technical Specifications
Duty Cycle
100% ED
Electrical Connection
DK25L (5-pole)
Holding Power
50 VA
Ingress Protection
IP65
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Switching Frequency (ac)
2 1/s
Max Tank Port Pressure (ac)
160 bar
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Rated Voltage
110 V AC (50/60 Hz)
Seal Material
FKM
Switch-on Power
220 VA
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
