Bosch Rexroth | 4WE6J6XEW110N9DK25LV62SO43A-1269-1
4WE6J6X/EW110N9DK25L/V/62SO43A-1269-1
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DK25L/V/62SO43A-1269-1 is a directional spool valve built by Bosch Rexroth for the WE Directional Spool Valves series and is used to route pressurized fluid in hydraulic automation. It follows the ISO 4401-03-02-0-05 porting pattern, so it mounts to standardized size 03 subplates without adapters. The valve supports a maximum flow rate of 60 l/min, allowing medium-capacity circuits to operate without cavitation. Pressure at the P, A, and B ports can reach 350 bar, giving the unit headroom for high-pressure drives. The T port is limited to 160 bar, matching return line requirements. Oil cleanliness must correspond to ISO 4406 class 20/18/15 to protect the spool and seats from abrasion. An IP65 housing guards the coil and connections against dust ingress and low-pressure water jets. Continuous energization is possible because the solenoid is rated for a 100 % ED duty cycle.
Nominal coil voltage is 110 V at 50 or 60 Hz, enabling direct connection to common control transformers. At 50 Hz the solenoid draws 0.52 A, while at 60 Hz it requires 0.39 A, so wiring and fuse sizing differ slightly between frequencies. Inrush demand is 220 VA at switch-on, providing the magnetic force needed to shift the spool. Once actuated, holding power falls to 50 VA, reducing heat generation during prolonged energization. The coil tolerates a voltage variation of ±10 %, maintaining reliable shifting under moderate supply fluctuations. Maximum switching frequency is 2 cycles per second, which prevents overheating and ensures consistent response. Operation is permitted with hydraulic fluid temperatures up to 80 °C when FKM seals are used.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Degree Of Protection
IP65
Duty Cycle
100% ED
Holding Power (ac)
50 VA
Max Flow
60 l/min
Max Hydraulic Fluid Temperature (fkm)
80 °C
Max Operating Pressure (p, A, B)
350 bar
Max Operating Pressure (t)
160 bar
Max Switching Frequency
2 1/s
Nominal Voltage
110 V (50/60 Hz)
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Switch-on Power (ac)
220 VA
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
