Bosch Rexroth | 4WE6J6XEW110N9DK25LV62-ANSO43A-1205
4WE6J6X/EW110N9DK25L/V/62 ANSO43A-1205
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DK25L/V/62 ANSO43A-1205 valve belongs to the WE Directional Spool Valves series and is manufactured by Bosch Rexroth. It controls hydraulic flow paths in automated systems and is intended for continuous duty because the coil is rated for a 100 percent duty cycle. The solenoid accepts a nominal supply of 110 V at 50 or 60 Hz, and the design tolerates voltage variations of ±10 percent. During energization the coil draws 220 VA to shift the spool, then drops to a holding requirement of 50 VA once the stroke is complete. Corresponding current draw is 0.52 A on 50 Hz supplies and 0.39 A on 60 Hz networks. Electrical termination is provided through a DK25L five-pole Mini-Change connector, allowing quick disconnection for maintenance. The valve conforms to the ANSI B93.9 porting pattern so it can bolt directly to matched sub-plates in industrial manifolds.
The hydraulic section is built for a maximum operating pressure of 350 bar at ports P, A, and B, while the tank port withstands up to 160 bar. This pressure capability supports heavy-duty actuators without risking spool seizure. Channel capacity reaches 60 liters per minute, a range that avoids excessive pressure drop in medium-flow circuits. Environmental protection is classified as IP65, so the enclosure resists dust ingress and low-pressure water jets common in factory wash-down zones. A concealed N9 manual override lets technicians shift the spool without power; its recessed form prevents accidental actuation yet can be reached with a small tool. Accurate plate alignment is aided by an ISO 8752-3x8-St locating pin hole that accepts a spring dowel, a feature that speeds block interchange during maintenance. These limits define the permissible loading and installation features for the valve in hydraulic automation.
Technical Specifications
Duty Cycle
100% ED
Electrical Connection
DK25L 5-Pole Mini-Change
Holding Power
50 VA
Locating Hole
ISO 8752-3x8-St
Manual Override
N9 (Concealed)
Maximum Flow (ac)
60 l/min
Maximum Operating Pressure (p,a,b)
350 bar
Maximum Tank Port Pressure (ac)
160 bar
Nominal Voltage
110 V (50/60 Hz)
Porting Pattern
ANSI B93.9
Protection Class
IP65
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Switch-on Power
220 VA
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
