Bosch Rexroth | 4WE6J6XEW110N9DK25LN1262
4WE6J6X/EW110N9DK25L/N12/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DK25L/N12/62 directional spool valve is produced by Bosch Rexroth for the WE Directional Spool Valves series. It shifts hydraulic flow paths by means of a wet-pin, detachable coil solenoid energized at a nominal 110 V AC supply compatible with 50 or 60 Hz operation. The coil draws 0.34 A at 50 Hz and 0.39 A at 60 Hz, enabling consistent actuation under either supply frequency. To limit insulation stress, the design tolerates switch-off overvoltages up to 500 V. Electrical termination is provided through a 5-pole ANSI/B93.55M connector coded DK25L, and the housing around the connector achieves an IP65 rating against dust and water jets. A concealed manual override identified by the N9 code allows local spool shifting during commissioning or power loss. The valve fastens to subplates that follow the NFPA T3.5.1 D03 interface, and accurate positioning is maintained with an ISO 8752-3x8-St locating hole.
On the hydraulic side, the valve handles maximum operating pressures of 350 bar at the A, B, and P ports while limiting the T port to 160 bar to protect return lines. A rated flow capacity of 60 l/min supports medium-duty circuit throughput without excessive pressure loss. Flow regulation at ports A and B is influenced by an internal throttle orifice measuring 1.2 mm in diameter, which moderates spool transition speed. Mounting surfaces follow the ISO 4401-03-02-0-05 porting pattern so the component aligns with common CETOP-03 subplates. Fluid entering the unit must meet cleanliness class ISO 4406 20/18/15 to preserve spool fit tolerances and solenoid tube life. Together these parameters allow the valve to guide directional changes reliably in automated hydraulic machinery while preserving compatible dimensions and pressure ratings within the series family.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Connector Ip Rating
IP65
Electrical Connection
5-pole ANSI/B93.55M (DK25L)
Locating Hole
ISO 8752-3x8-St
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure (a, B, P)
350 bar
Max Switch-off Overvoltage
500 V
Max T-port Pressure (ac)
160 bar
Nfpa Interface
T3.5.1 D03
Nominal Voltage
110 V AC (50/60 Hz)
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (50 Hz)
0.34 A
Rated Current (60 Hz)
0.39 A
Solenoid Type
Wet-Pin, Detachable Coil
Throttle Orifice (a, B)
1.2 mm
1620 Old Apex Road
Shipping & Payment Options
