Bosch Rexroth | 4WE6J6XEW110N9DK25LN0862-CSA
4WE6J6X/EW110N9DK25L/N08/62 CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DK25L/N08/62 CSA directional spool valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and is used to route pressurized fluid in hydraulic automation circuits. It is built in valve size 6, so it fits standard D03 manifolds that match the ISO 4401-03-02-0-05 porting pattern. A solenoid winding rated for 110 V AC at 50/60 Hz shifts the spool; the coil draws 0.52 A at 50 Hz or 0.39 A at 60 Hz, allowing the same hardware to run on either supply frequency. Insulation class H enables the coil to tolerate elevated operating temperatures without degradation. Electrical termination is through a DK25L five-pin connector that supports quick plug-in replacement. An IP65 protection class keeps dust and low-pressure water jets away from internal parts, so the valve can operate in typical machine environments. Installed with two solenoids, the unit weighs 1.95 kg, which helps designers predict manifold loading.
The hydraulic end of the valve handles a maximum pressure of 350 bar on ports P, A, and B, while the tank port is limited to 160 bar to protect return-line components. Flow capacity reaches 60 L/min, and a Ø0.8 mm N08 throttle insert in channels A and B moderates flow spikes during rapid spool shifts. A concealed N9 manual override lets maintenance staff move the spool without energizing the coil, which is useful during commissioning or power loss. Plate alignment is secured by an ISO 8752-3×8 locating pin identified by the /62 suffix, preventing port mismatch when the valve is mounted. Oil cleanliness must meet ISO 4406 20/18/15 to avoid spool sticking and premature wear. Together, these features establish predictable pressure control, controlled actuation, and consistent service life in automated hydraulic systems.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Coil Voltage
110 V AC 50/60 Hz
Electrical Connector
DK25L (5-pin)
Insulation Class (ac)
H
Locating Hole
ISO 8752-3x8 Pin (/62)
Manual Override
Concealed (N9)
Max Flow (ac)
60 L/min
Max Pressure (p/a/b)
350 bar
Max Tank Pressure (t, Ac)
160 bar
Porting Pattern
ISO 4401-03-02-0-05 (D03)
Protection Class
IP65
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Throttle Insert (a And B)
N08 (Ø0.8 mm)
Valve Size
6
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
