Bosch Rexroth | 4WE6J6XEW110N9DK25LN08-CSA
4WE6J6X/EW110N9DK25L/N08 CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DK25L/N08 CSA valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and is applied to route pressurized oil within hydraulic automation circuits. It is classified as nominal size 6, so it bolts directly to subplates designed for the NFPA D03 interface and supports compact manifold layouts. The J-coded spool establishes the flow paths needed for bidirectional cylinder control, while a maximum flow rate of 60 l/min allows medium-capacity actuators to cycle without starvation. Working ports P, A, and B can be loaded up to 350 bar, and the tank port is limited to 160 bar to protect return lines. A throttle insert with 0.8 mm orifices in ports A and B moderates acceleration and cushions load shocks. A concealed manual override lets maintenance staff shift the spool during commissioning or power loss without exposing the mechanism to contaminants.
An embedded solenoid operates on a nominal 110 V AC supply, and the coil tolerates ±10 % voltage variation so it remains functional under typical plant voltage swings. Switch-on power draws 220 VA to move the spool, after which holding power falls to 50 VA to reduce heat generation; under 60 Hz mains this corresponds to a steady 0.39 A current. Continuous energization is permitted because the duty cycle is rated at 100 % ED (S1). Electrical hookup is through a DK25L five-pole connector, enabling quick exchange of valves during service. The porting pattern follows ISO 4401-03-02-0-05, ensuring interchangeability with standard base plates and simplifying circuit redesign.
Technical Specifications
Duty Cycle
100% ED (S1)
Electrical Connection
DK25L (5-pole)
Holding Power (ac)
50 VA
Interface
NFPA D03
Manual Override
Concealed (N9)
Max Operating Pressure (p, A, B)
350 bar
Max Tank Port Pressure (ac)
160 bar
Maximum Flow (ac)
60 l/min
Nominal Size
6
Nominal Voltage
110 V AC
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (110 V 60 Hz)
0.39 A
Spool Symbol
J
Switch-on Power (ac)
220 VA
Throttle Insert
A and B Ø 0.8 mm (N08)
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
