Bosch Rexroth | 4WE6J6XEW110N9DK25LB10V
4WE6J6X/EW110N9DK25L/B10V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DK25L/B10V valve belongs to the WE Directional Spool Valves series and is produced by Bosch Rexroth for hydraulic automation that requires reliable flow direction control. It uses a J-type spool to shift pressure lines and is machined for the ISO 4401-03-02-0-05 (NFPA D03) porting pattern so it can mount on standard sub-plates. The valve sustains operating pressures up to 350 bar at the pressure and work ports, while the tank port is limited to 160 bar, enabling use in medium- to high-pressure circuits. A maximum flow rate of 60 l/min passes through the body when the appropriate spool land is open. An integrated throttle insert with a 1.0 mm orifice in the P line allows inlet metering for finer speed control. FKM seals protect internal clearances against mineral oils and synthetic fluids. A concealed manual override lets maintenance staff shift the spool during commissioning without exposing the interior to contaminants.
The solenoid assembly is rated for a 110 VAC supply at 50 or 60 Hz, providing mains compatibility. It draws 220 VA during energization and settles to 50 VA holding power once the armature reaches its end position, reducing heat during prolonged operation. Continuous duty is supported by a 100% rating, so the coil can remain energized without rest periods. Electrical connection is made through a DK25L five-pole plug. An IP65 enclosure rating protects the coil and terminals from dust and water jets when a matched connector is used. The coil surface may reach 120 °C under worst-case thermal conditions and must be considered in panel layout. These electrical characteristics complement the hydraulic section to deliver dependable directional control in industrial machinery.
Technical Specifications
Coil Holding Power
50 VA
Coil Switch-on Power
220 VA
Coil Voltage
110 VAC (50/60 Hz)
Duty Cycle
100%
Electrical Connector
DK25L (5-pole)
Ingress Protection
IP65
Manual Override
Concealed
Max Coil Surface Temperature
120 C
Max Operating Pressure (p/a/b)
350 bar
Maximum Flow (ac)
60 l/min
Porting Pattern
ISO 4401-03-02-0-05 (NFPA D03)
Seal Material
FKM
Spool Type
J
Tank Port Max Pressure (ac)
160 bar
Throttle Insert
P Ø1.0 mm
1620 Old Apex Road
Shipping & Payment Options
