Bosch Rexroth | 4WE6J6XEW110N9DK25LB10SO525
4WE6J6X/EW110N9DK25L/B10SO525
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DK25L/B10SO525 valve is manufactured by Bosch Rexroth for the WE Directional Spool Valves series. It directs hydraulic flow in automated machinery where reliable on-off switching is required. A solenoid voltage rating of 110 V AC at 50 or 60 Hz aligns with common plant supplies. Continuous duty at 100% ED permits the coil to remain energized without forced cooling. During energization it draws 220 VA to move the spool, then drops to a 50 VA holding level to limit heat rise. The actuator can shift up to two times per second, supporting moderate cycling rates in press or clamp circuits. Electrical hookup is handled through a five-pole Mini-Change DK25L connector, which enables quick disconnection for service. A concealed N9 manual override gives local control during commissioning while protecting the mechanism from dirt. With IP65 sealing the enclosure resists dust and low-pressure water jets, and the body can be installed in any orientation to suit tight manifolds.
The valve passes a maximum flow of 60 l/min on AC coils, matching mid-size actuators. Working ports p, a, and b withstand 350 bar so it suits high-pressure circuits. The tank port remains functional up to 160 bar, preventing return-line surges from causing malfunction. Port geometry follows ISO 4401-03-02-0-05. This standard interface lets the body mount on size 03 sandwich plates without adapter blocks. NBR seals confine fluid within the housing and offer compatibility with conventionally refined mineral oils. A throttle insert in port P with a 1.0 mm orifice, identified as B10, cushions pressure spikes during rapid spool movement. The assembly weighs 1.95 kg, so technicians can handle the unit without special lifting tools.
Technical Specifications
Coil Voltage
110 V AC (50/60 Hz)
Duty Cycle
100% ED
Electrical Connection
5-Pole Mini-Change (DK25L)
Holding Power
50 VA (AC)
Ingress Protection
IP65
Installation Position
Any
Manual Override
Concealed (N9)
Max Flow
60 l/min (AC)
Max Operating Pressure (p,a,b)
350 bar
Max Switching Frequency
2 1/s (AC)
Max Tank Port Pressure
160 bar (AC)
Porting Pattern
ISO 4401-03-02-0-05
Seal Material
NBR
Switch-on Power
220 VA (AC)
Throttle Insert
Port P Ø1.0 mm (B10)
Weight
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
