Bosch Rexroth | 4WE6J6XEW110N9DK25LB10-AN
4WE6J6X/EW110N9DK25L/B10 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DK25L/B10 AN directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series and serves to route pressurized fluid in automated hydraulic circuits. A J-configured spool establishes the required flow paths, while a solenoid rated for 110 V AC at 50/60 Hz shifts the element. The coil demands 220 VA at switch-on to create the initial magnetic field and then drops to 50 VA holding power to curb energy draw. Current consumption is 0.52 A on 50 Hz supplies and 0.39 A on 60 Hz supplies. Continuous energization is possible because the unit is specified for a 100 % duty cycle. Wiring is completed through a DK25L five-pole electrical connector that supports quick removal. An IP65 enclosure rating blocks dust and low-pressure water jets so cabinet sealing is not required.
A concealed N9 manual override lets maintenance staff shift the spool without power. The coil surface may reach 120 °C during prolonged activation, so adjacent components must tolerate that temperature. Maximum flow in AC service is 60 l/min, and the valve withstands 350 bar on pressure ports while limiting the T port to 160 bar. Interface geometry follows the ANSI B93.9 AN porting pattern for compatibility with standard subplates. A 1.0 mm throttle insert in port P, identified by code B10, moderates inlet flow to reduce pressure shocks.
Technical Specifications
Duty Cycle
100% ED
Electrical Connector
DK25L (5-pole)
Holding Power
50 VA
Manual Override
Concealed (N9)
Max Coil Surface Temperature
120 °C
Max Flow (ac)
60 l/min
Max Operating Pressure
350 bar
Max Port T Pressure (ac)
160 bar
Nominal Voltage
110 V AC (50/60 Hz)
Porting Pattern
ANSI B93.9 (AN)
Protection Class
IP65
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Spool Symbol
J
Switch-on Power
220 VA
Throttle Insert (port P)
Ø1.0 mm (B10)
1620 Old Apex Road
Shipping & Payment Options
