4WE6J6X/EW110N9DK25L/B08V/62

The 4WE6J6X/EW110N9DK25L/B08V/62 valve is manufactured by Bosch Rexroth and belongs to the WE Directional Spool Valves series. It directs hydraulic flow to actuators in automated machinery. The unit is energized by a 110 V AC coil that accepts both 50 Hz and 60 Hz supplies; current draw equals 0.52 A at 50 Hz and 0.39 A at 60 Hz, permitting direct connection to common control transformers. Electrical linkage is handled through a 5-pole Mini-Change connector that follows ANSI/B93.55M, allowing quick plug-and-play cabling on manifolds. A concealed manual override, marked N9, lets technicians shift the spool during commissioning without exposing moving parts. Because the installation position is unrestricted, the valve can be placed horizontally or vertically to match manifold layouts. Two solenoids bring the assembled weight to 1.95 kg, light enough for compact stack assemblies.

The hydraulic section tolerates line pressures up to 350 bar on ports P, A, and B, while the tank port withstands 160 bar, so the device can control high-pressure circuits with elevated back-pressure return lines. A maximum flow capacity of 60 l/min supports medium-duty cylinder speeds. To moderate inlet surges, a 0.8 mm throttle insert is fitted in port P, generating a fixed pressure drop that stabilizes downstream motion. FKM sealing resists synthetic and mineral oils at elevated temperatures, extending service life in aggressive fluids. Environmental protection reaches IP65 when the connector is properly installed, guarding the coil against dust and low-pressure water jets. A locating hole and pin are included to align the body precisely on the subplate and prevent rotational misplacement during tightening, ensuring repeatable port sealing across multiple maintenance cycles.