Bosch Rexroth | 4WE6J6XEW110N9DALV-CSA
4WE6J6X/EW110N9DAL/V CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DAL/V CSA directional spool valve is manufactured by Bosch Rexroth as part of the WE Directional Spool Valves series and is intended to shift hydraulic flow paths in automated systems. It operates on a supply voltage of 110 V AC at either 50 or 60 Hz, ensuring compatibility with common control transformers. The rated current reaches 0.52 A at 50 Hz and 0.39 A at 60 Hz so coil heating remains limited during continuous service. A switch-on power draw of 220 VA produces the magnetic force required for rapid actuation, while the holding power falls to 50 VA to conserve energy once the spool is in position. Continuous use is supported by a 100 % duty cycle, which prevents time-based derating in cyclic machines. The valve follows the ISO 4401-03-02-0-05 porting pattern so it mounts directly on standard sub-plates. A concealed N9 manual override allows technicians to shift the spool during commissioning or in the event of power loss.
The solenoid lead exits through a 1/2-14 NPT cable gland so conduit or armored cable can be attached without special adapters. The housing carries an IP65 rating, protecting the coil against dust ingress and water jets in wash-down areas. Sealing surfaces use FKM material to resist synthetic fluids and elevated temperatures. In operation ports P, A, and B withstand pressures up to 350 bar, while port T is limited to 160 bar, matching typical return-line capacities. The flow path accepts up to 60 liters per minute, allowing medium-size actuators to move at normal speeds. A total mass of 1.95 kg for the two-solenoid version aids installation on compact manifolds without additional support. Voltage tolerance of ±10 % lets the coil perform reliably under minor supply fluctuations found in industrial plants.
Technical Specifications
Duty Cycle
100% ED
Electrical Connection
1/2-14 NPT Cable Gland
Holding Power
50 VA
Ip Rating
IP65
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure (p,a,b)
350 bar
Max Pressure Port T (ac)
160 bar
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Seal Material
FKM
Supply Voltage
110 V AC (50/60 Hz)
Switch-on Power
220 VA
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
