Bosch Rexroth | 4WE6J6XEW110N9DALN0862
4WE6J6X/EW110N9DAL/N08/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DAL/N08/62 directional spool valve is produced by Bosch Rexroth for the WE Directional Spool Valves series and directs hydraulic flow to cylinders or motors in automated machinery. Its porting pattern follows ISO 4401-03-02-0-05 so it fits standard CETOP 3 manifolds. The body tolerates operating pressure up to 350 bar, allowing use in high-pressure circuits, and handles a maximum flow of 60 l/min without excessive loss. The solenoid coil is rated for 110 VAC at 50/60 Hz and draws 220 VA during inrush to shift the spool quickly. Steady current settles at 0.34 A when supplied at 50 Hz, reducing continuous power demand. A duty cycle of 100 percent S1 permits uninterrupted energization, while the coil surface may reach 120 °C under full load, indicating its thermal capacity.
Once the spool is seated, holding power drops to 50 VA to limit heat generation. An IP65 enclosure shields the electrical parts from dust and low-pressure water jets for dependable plant floor service. Wiring is brought in through a 1/2-14 NPT cable gland denoted DAL, providing a secure conduit entry. A concealed manual override marked N9 lets technicians shift the spool without power during setup or maintenance. Flow stabilization is aided by a 0.8 mm throttle insert in ports A and B, supplied under option N08. The tank port can accept back-pressure up to 160 bar, accommodating systems with pressurized return lines. Required oil cleanliness is ISO 4406 class 20/18/15 to protect internal sealing edges, and an ISO 8752-3×8 locating pin, referenced by suffix 62, fixes the valve accurately on the manifold.
Technical Specifications
Coil Nominal Voltage
110 VAC (50/60 Hz)
Duty Cycle
100% (S1)
Electrical Connection
1/2-14 NPT Cable Gland (DAL)
Fluid Cleanliness
ISO 4406 class 20/18/15
Holding Power (ac)
50 VA
Ingress Protection
IP65
Inrush Power (ac)
220 VA
Locating Hole And Pin
ISO 8752-3x8 (/62)
Manual Override
Concealed (N9)
Max Coil Surface Temp (ac)
120 °C
Max Flow (ac)
60 l/min
Max Operating Pressure
350 bar
Max Tank Port Pressure (ac)
160 bar
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (50 Hz)
0.34 A
Throttle Insert (a And B)
0.8 mm (N08)
1620 Old Apex Road
Shipping & Payment Options
