1-888-551-3082 | 1-919-443-0207 | sales@hydraulicpartsusa.com
You will get an email confirming we have received your inquiry.
A team member will review your request and be in touch concerning any questions or specifications.
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DAL/B10V CSA directional spool valve is built by Bosch Rexroth within the WE Directional Spool Valves series. It directs hydraulic flow in automation systems by shifting a J-coded spool whose symbol defines the internal flow paths. The nominal size 6 interface establishes the port dimensions and mounting pattern. A wet-pin high-power solenoid moves the spool when energized by a 110 V AC 50/60 Hz supply. The coil requires 220 VA of switch-on power and then drops to 50 VA of holding power, drawing 0.52 A at 50 Hz or 0.39 A at 60 Hz. Electrical connection is provided through a 1/2-14 NPT cable gland marked DAL, which routes the incoming conductors through a sealed conduit entry.
The valve withstands 350 bar on the pressure, A, and B ports, while the tank port is limited to 160 bar. It supports a maximum flow of 60 l/min so pressure losses remain within design limits. The housing meets the IP65 enclosure rating, preventing dust ingress and low-pressure water spray from reaching the coil or wiring. FKM seals resist common hydraulic fluids and elevated temperature. A concealed manual override identified as N9 allows the spool to be shifted without electrical power. A throttle insert in port P with a 1.0 mm orifice, coded B10, moderates inlet flow for controlled actuation.
Electrical Connection
1/2-14 NPT Cable Gland (DAL)
Enclosure Rating
IP65
Holding Power
50 VA
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure (p,a,b)
350 bar
Max Tank Port Pressure (t)
160 bar
Nominal Size
6
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Rated Voltage
110 V AC (50/60 Hz)
Seal Material
FKM
Solenoid Type
Wet-Pin High-Power
Spool Symbol
J
Switch-on Power
220 VA
Throttle Insert
Port P, Ø1.0 mm (B10)
Worldwide Shipping with FedEx and UPS.
We accept all major credit cards
1 year Hydraulic Parts USA warranty on ALL products
We are a Better Business Bureau A+ business