Bosch Rexroth | 4WE6J6XEW110N9DAL62-AN
4WE6J6X/EW110N9DAL/62 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DAL/62 AN directional valve is produced by Bosch Rexroth for the WE Directional Spool Valves series and directs hydraulic flow in automated circuits. As a size 6 unit, it matches compact manifolds while still supporting industrial flow demands. The mounting interface follows ISO 4401-03-02-0-05, so the valve can drop onto standard subplates without adaptation. Its porting pattern conforms to ANSI B93.9 (D03), ensuring compatibility with North American layouts. Four main ports allow pressure, tank, and dual work lines to be connected in the typical directional configuration. Electrical actuation is supplied by a 110 V AC coil that accepts both 50 and 60 Hz, so a single model suits varied plant supplies. At 50 Hz the coil draws 0.52 A, while at 60 Hz the demand falls to 0.39 A to limit panel loading. The DAL 1/2-14 NPT electrical connection provides a threaded entry that seals against oil and dust. An IP65 ingress rating keeps moisture and particulate from the solenoid housing in wash-down areas.
The valve handles a maximum operating pressure of 350 bar on ports P, A, and B. This rating allows it to pair with high-pressure pumps in industrial power units. Tank port C can withstand 160 bar, permitting back-pressure in energy-saving circuits. A peak flow of 60 l/min maintains rapid actuator motion without excessive pressure drop. Because the installation position is unrestricted, designers can mount the body horizontally or vertically to suit piping. A concealed N9 manual override lets maintenance staff shift the spool during commissioning without energizing the coil. The locating pin specified as ISO 8752-3x8 provides positive orientation on the subplate, preventing port mismatch. Fluid cleanliness must stay within ISO 4406 class 20/18/15 to protect the spool and sealing edges from wear.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Coil Voltage
110 V AC (50/60 Hz)
Electrical Connection
DAL (1/2-14 NPT)
Ingress Protection
IP65
Installation Position
Any
Locating Pin
ISO 8752-3x8
Main Ports
4
Manual Override
N9 (Concealed)
Max Flow (ac)
60 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (ac)
160 bar
Mounting Interface
ISO 4401-03-02-0-05
Porting Pattern
ANSI B93.9 (D03)
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Size
6
1620 Old Apex Road
Shipping & Payment Options
