Bosch Rexroth | 4WE6J6XEW110N9DAB08V62
4WE6J6X/EW110N9DA/B08V/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EW110N9DA/B08V/62 directional spool valve belongs to the WE Directional Spool Valves series and is produced by Bosch Rexroth. It shifts hydraulic flow between ports to automate cylinders and motors in mobile and industrial equipment. Valve size 6 (NG6) establishes a compact form factor that fits into sub-plate assemblies, while the ISO 4401-03-02-0-05 porting pattern aligns the working lines with common manifolds. The mounting interface follows NFPA T3.5.1 D03 so the unit bolts directly to standardized bases without adapters. A continuous duty rating of 100 % ED permits the solenoid to remain energized indefinitely. The coil is wound for 110 V AC at 50 or 60 Hz and draws 0.52 A at 50 Hz or 0.39 A at 60 Hz. During energization the circuit sees 220 VA of switch-on power to overcome static friction, after which holding power falls to 50 VA to limit heat. These electrical characteristics support reliable, uninterrupted service in automated hydraulic stations.
A concealed manual override, coded N9, lets maintenance personnel shift the spool without electrical power and remains recessed to prevent accidental operation. The pressure rating reaches 350 bar on the P, A, and B lines, while the tank port tolerates up to 160 bar, covering a wide range of system designs. Flow capacity is 60 l/min and the spool can be switched up to two times per second, permitting rapid cycling in moderate-speed servo loops. A 0.8 mm throttle insert in the P port, identified as option B08, provides initial metering to dampen pressure surges on start-up. Sealing elements are made of FKM, giving resistance to high temperature and many synthetic fluids. Together these hydraulic limits, the built-in throttling, and the override feature ensure consistent performance when the valve is installed in systems powered by the specified 110 V coil.
Technical Specifications
Duty Cycle
100% ED
Holding Power
50 VA
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure (p, A, B)
350 bar
Max Switching Frequency (ac)
2 1/s
Max Tank Port Pressure (ac)
160 bar
Mounting Interface
NFPA T3.5.1 D03
Nominal Voltage
110 V AC (50/60 Hz)
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Seal Material
FKM
Switch-on Power
220 VA
Throttle Insert (p Port)
0.8 mm (B08)
Valve Size
6 (NG6)
1620 Old Apex Road
Shipping & Payment Options
