Bosch Rexroth | 4WE6J6XEG96NK4B10V
4WE6J6X/EG96NK4/B10V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG96NK4/B10V valve is manufactured by Bosch Rexroth for the WE Directional Spool Valves series and directs hydraulic flow to actuators in automated machinery. The solenoid coil is designed for a nominal voltage of 96 V DC, and it remains within specification as long as the supply stays within a ±10 % tolerance. With a rated current of 0.33 A the coil draws 30 W of nominal power, so control cabinets can size power supplies and conductors correctly. Electrical connection is made through a DIN EN 175301-803 K4 plug, which simplifies field wiring and supports quick coil replacement. The enclosure holds an IP65 protection class so the valve resists dust ingress and low-pressure water jets when assembled with the proper gasket. Continuous energization is permitted because the duty cycle is 100 % (S1), eliminating the need for rest periods during long actuation sequences. A calculated MTTFd of 300 years supports safety assessments that rely on high component reliability.
Fluid cleanliness must reach ISO 4406 class 20/18/15 to prevent spool wear and maintain switching accuracy. The hydraulic section withstands 350 bar at ports A, B, and P, while port T is limited to 210 bar during direct current operation, enabling use in high-pressure circuits with a lower tank line rating. Flow up to 80 L/min can pass without exceeding the allowable pressure drop, covering medium-size cylinder and motor applications. When the manual override is used, tank pressure may not exceed 50 bar, ensuring the override button can be operated without excessive force. Mounting follows the ISO 4401-03-02-0-05 porting pattern, so the valve fits common size 6 sub-plates. FKM seals are installed to handle mineral oils and many synthetic fluids at elevated temperatures. A throttle insert with a 1.0 mm orifice is fitted in port P to damp pressure spikes and smooth flow during rapid spool shifts.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Duty Cycle
100% (S1)
Electrical Connector
DIN EN 175301-803 (K4)
Manual Override Tank Pressure Max
50 bar
Max Pressure Port T (dc)
210 bar
Max Pressure Ports A/b/p
350 bar
Maximum Flow (dc)
80 l/min
Mttfd
300 years
Nominal Power
30 W
Nominal Voltage
96 V DC
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Rated Current
0.33 A
Seal Material
FKM
Throttle Insert
Port P Ø 1.0 mm
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
