Bosch Rexroth | 4WE6J6XEG96N9K4B1262
4WE6J6X/EG96N9K4/B12/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG96N9K4/B12/62 directional spool valve is produced by Bosch Rexroth for the WE Directional Spool Valves series. It directs hydraulic flow paths in automation circuits that require rapid on-off control functions. With a nominal size of 6, it mates with compact manifolds used on machinery lines. The valve supports a porting pattern of ISO 4401-03-02-0-05, ensuring interchangeability with standard CETOP 03 subplates. A maximum flow capacity of 80 l/min allows the unit to handle moderate throughput without cavitation. It withstands up to 350 bar on ports P, A, and B, which accommodates high-pressure power units. The tank port is limited to 210 bar to protect return lines from excessive back-pressure. A throttle insert of 1.2 mm in port P restricts surge flow at the pump inlet. A mounting surface roughness of Rzmax 4 is required to maintain gasket sealing between the valve and manifold.
The solenoid assembly operates on 96 V DC and draws a steady 0.33 A, allowing direct connection to standard control boards. Electrical hookup is via a DIN EN 175301-803 K4 connector, providing quick detachment for service technicians. The enclosure carries an IP65 rating, so the moving components are protected against dust ingress and low-pressure water jets. A concealed N9 manual override permits local actuation during commissioning without exposing live electrical parts. For layout compatibility, the base also matches the NFPA T3.5.1 R2-2002 D03 pattern used in North American blocks. A clamping length of 42 mm sets the distance between mounting screws and ensures consistent preload on the sealing face. An ISO 8752-3x8-St locating hole aligns the body on the subplate to speed assembly and prevent rotational misplacement. The valve weighs 1.95 kg when fitted with two solenoids, which keeps manifold mass within ergonomic handling limits.
Technical Specifications
Clamping Length
42 mm
Coil Voltage
96 V DC
Connector Type
DIN EN 175301-803 (K4)
Ingress Protection
IP65
Locating Hole
ISO 8752-3x8-St
Manual Override
Concealed N9
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (dc)
210 bar
Mounting Surface Roughness
Rzmax 4
Nfpa Port Pattern
T3.5.1 R2-2002 D03
Nominal Size
6
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (96 V Dc)
0.33 A
Throttle Insert (port P)
Ø 1.2 mm
Valve Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
