Bosch Rexroth | 4WE6J6XEG24NDK25LB10
4WE6J6X/EG24NDK25L/B10
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24NDK25L/B10 valve is manufactured by Bosch Rexroth within the WE Directional Spool Valves series. Designed to shift hydraulic flow between ports in automated machinery, it uses a spool identified by symbol J to establish the required circuit positions. The housing follows the ISO 4401-03-02-0-05 porting pattern, so it mates with common CETOP 03 subplates. A 24 V DC solenoid energizes the spool; at this voltage the coil draws 1.25 A and consumes 30 W, data that guides power-supply sizing. Electrical connection is provided through a DK25L five-pole plug, allowing rapid installation inside machine wiring looms. An IP65 enclosure rating protects the coil and terminals against dust ingress and low-pressure water jets in typical factory environments.
Continuous duty is supported by a 100 % ED rating, which permits the solenoid to remain powered without thermal cycling. The coil surface may reach 120 °C under worst-case heating, a limit that determines surrounding component spacing. Hydraulic capabilities include a maximum operating pressure of 350 bar at the P, A, and B ports and a tank port limit of 210 bar, enabling use in high-pressure circuits. Flow capacity is 80 l/min, so actuator speed calculations can be based on that figure. A throttle insert with a 1.0 mm orifice in port P is fitted to meter the inlet and smooth velocity changes. Transient voltage at switch-off is restricted to 500 V to protect driving electronics, and there is no manual override, so all actuation must be performed electrically.
Technical Specifications
Coil Max Surface Temperature
120 C
Duty Cycle
100% ED
Electrical Connection
DK25L (5-pole)
Manual Override
N
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Switch-off Overvoltage
500 V
Max Tank Port Pressure (dc)
210 bar
Nominal Power
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Rated Current
1.25 A
Spool Symbol
J
Throttle Insert
Port P Ø 1.0 mm
1620 Old Apex Road
Shipping & Payment Options
