Bosch Rexroth | 4WE6J6XEG24N9K73L62SO407-AN
4WE6J6X/EG24N9K73L/62SO407 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9K73L/62SO407 AN belongs to the WE Directional Spool Valves series manufactured by Bosch Rexroth for switching flow paths in hydraulic automation. It is built in size 6 so it installs on compact subplates without excessive manifold space. A porting pattern in accordance with ANSI B93.9 aligns the pressure, tank, and working ports with standard cavity layouts. The solenoid is rated for a nominal 24 V DC supply, and a voltage tolerance of ±10 % keeps operation stable when bus voltage drifts. Coil consumption remains at 8 W, limiting heat rise and allowing dense valve stacking. A 100 % duty cycle lets the device stay energized continuously during prolonged machine cycles. Connection is via an M12x1 four-pin plug coded K73L, supporting quick cable changes and diagnostic loops. The housing carries an IP65 ingress rating so dust and low-pressure wash-down do not impair the electrical section.
The hydraulic section passes up to 60 l/min of oil, matching medium-size actuator demands without throttling flow. Working ports P, A, and B tolerate 315 bar while the tank port withstands 210 bar, enabling high-pressure circuits that still vent safely to reservoir. A maximum switching frequency of 2 Hz keeps wear within design limits on machines that index several times each second. The coil is wound to insulation class F to resist thermal aging, and its surface temperature may reach 85 °C under worst-case energization. A concealed manual override permits spool actuation during commissioning yet prevents inadvertent use in service. Mounting alignment is secured by an ISO 8752-3×8-St locating hole so the body seats correctly against the subplate each time it is replaced.
Technical Specifications
Connector Type
M12x1 4-Pin (K73L)
Duty Cycle
100%
Ingress Protection
IP65
Insulation Class (dc)
F
Locating Hole
ISO 8752-3x8-St
Manual Override
Concealed
Max Coil Surface Temperature
85 C
Max Flow (dc)
60 l/min
Max Operating Pressure (p,a,b)
315 bar
Max Operating Pressure (t)
210 bar
Max Switching Frequency
2 Hz
Nominal Power
8 W
Nominal Voltage
24 V DC
Porting Pattern
ANSI B93.9
Size
6
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
