Bosch Rexroth | 4WE6J6XEG24N9K72LX12-AN
4WE6J6X/EG24N9K72L/X12 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9K72L/X12 AN directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series to route hydraulic flow in automated machinery. It follows the ISO 4401-03-02-0-05 porting pattern so it bolts directly to size 03 subplates without adapters. A maximum flow capacity of 80 l/min supports medium-duty actuator circuits by keeping pressure loss low. The coil operates on 24 V DC and draws 1.25 A, enabling use with standard control power supplies, while the 30 W nominal power rating limits heat generation during continuous energization. Voltage tolerance of ±10% allows dependable shifting even when supply levels fluctuate. An M12×1 four-pole electrical connector with an integrated diode simplifies wiring and guards against reverse polarity. Switch-off overvoltage is capped at 500 V to shield driver electronics when the field collapses. IP65 enclosure protection permits installation in wet or dusty environments, and insulation class F allows the winding to withstand higher temperatures without degradation.
The valve tolerates 350 bar on ports P, A, and B, enabling use in high-pressure drive circuits, while port T is limited to 210 bar to protect return-line components. A 1.2 mm throttle insert in port T meters exhaust flow to reduce pressure shock during spool movement. Maximum switching frequency is 1 Hz, which suits typical clamping or positioning duties that do not demand rapid cycling. A 100 % duty cycle permits uninterrupted operation, preventing thermal overload during long production shifts. The concealed manual override lets technicians manually shift the spool during setup or power loss while keeping the control surface protected from accidental activation. Together these characteristics provide reliable hydraulic actuation for diverse automation tasks.
Technical Specifications
Duty Cycle
100% (S1)
Electrical Connection
M12x1 4-Pole With Diode
Insulation Class (dc)
F
Manual Override
Concealed
Max Flow (dc)
80 l/min
Max Operating Pressure (p,a,b)
350 bar
Max Operating Pressure (t)
210 bar
Max Switch-off Overvoltage
500 V
Max Switching Frequency
1 Hz
Nominal Power (dc)
30 W
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Rated Current (24 V Dc)
1.25 A
Rated Voltage
24 V DC
Throttle Insert (port T)
1.2 mm
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
