Bosch Rexroth | 4WE6J6XEG24N9K4X20V
4WE6J6X/EG24N9K4/X20V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9K4/X20V directional valve is produced by Bosch Rexroth in the WE Directional Spool Valves series. It directs hydraulic flow to actuators in automated machinery and is built for subplate mounting. The valve is supplied in nominal size 6, which matches compact D03 manifolds. Its porting pattern follows ISO 4401-03-02-0-05, and the mounting interface complies with NFPA T3.5.1 D03 to ensure interchangeability with standard base plates. Operation is provided by a wet-pin high-power solenoid energized at 24 V DC and drawing a rated coil current of 1.25 A. Electrical hookup uses a DIN EN 175301-803 connector coded K4, while an IP65 enclosure rating is achieved when the mating plug is fitted, guarding the coil against dust and low-pressure jets. This hydraulic component therefore integrates easily into control cabinets and field installations where compact size and sealed electrical terminations are required.
Flow capabilities reach 80 l/min in direct current service, and the pressure limits are set at 350 bar on ports P, A, and B to accommodate high-pressure circuits. The return path on port T may be loaded to 210 bar, while an internal throttle insert of 2.0 mm in the T port identified as X20 moderates back-flow to prevent pressure shocks. The concealed N9 manual override allows local actuation during commissioning, and it remains protected within the coil housing; this feature is approved for tank pressures up to 50 bar when used. The valve can be installed in any orientation, which simplifies manifold layout in compact hydraulic blocks. FKM seals are fitted to resist aggressive fluids and elevated temperatures encountered in industrial environments.
Technical Specifications
Electrical Connection
DIN EN 175301-803 (K4)
Ingress Protection
IP65 (with mating connector)
Installation Position
Any
Manual Override
N9 (Concealed)
Manual Override Max Tank Pressure
50 bar
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (t)
210 bar
Mounting Interface
NFPA T3.5.1 D03
Nominal Coil Voltage
24 V DC
Nominal Size
6
Porting Pattern
ISO 4401-03-02-0-05
Rated Coil Current
1.25 A
Seal Material
FKM
Solenoid Type
Wet-Pin High-Power
Throttle Insert (t Port)
Ø 2.0 mm (X20)
1620 Old Apex Road
Shipping & Payment Options
