Bosch Rexroth | 4WE6J6XEG24N9K4B08N0862
4WE6J6X/EG24N9K4/B08N08/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9K4/B08N08/62 directional control valve belongs to the WE Directional Spool Valves series and is manufactured by Bosch Rexroth. It shifts hydraulic flow paths in automated machinery using a solenoid actuator supplied with 24 V DC, so circuit designers can integrate it with common control voltages. The coil draws a rated current of 1.25 A and consumes 30 W, and the 100 percent duty cycle keeps the valve energized continuously without overheating. A voltage tolerance of ±10 percent lets the coil withstand moderate supply fluctuation, while a maximum switching frequency of 4.2 cycles per second enables rapid directional changes. The sub-plate interface follows the ISO 4401-03-02-0-05 porting pattern, and a locating hole sized ISO 8752-3×8-St (/62) secures alignment during mounting. Flow stability is supported by a 0.8 mm throttle insert in the P port (B08) and identical 0.8 mm inserts in the A and B ports (N08), which limit surge when the spool opens.
The hydraulic section is rated for 350 bar on the pressure, A, and B ports, and the tank line can accept up to 210 bar, so the valve suits high-pressure circuits. It passes up to 80 liters per minute under direct current control, maintaining actuator speed in medium-flow systems. Protection against dust and water jets is established by an IP65 enclosure around the K4 coil, and fluid cleanliness must reach ISO 4406 (c) 20/18/15 to preserve spool accuracy. The assembled unit with two solenoids weighs 1.95 kg, allowing straightforward handling during service. These characteristics confirm compatibility with demanding industrial hydraulic automation that requires reliable switching under continuous load.
Technical Specifications
Cleanliness Class
ISO 4406 (c) 20/18/15
Coil Voltage
24 V DC
Duty Cycle
100%
Ingress Protection (k4)
IP65
Locating Hole
ISO 8752-3x8-St (/62)
Max Flow (dc)
80 l/min
Max Operating Pressure (p, A, B)
350 bar
Max Switching Frequency (dc)
4.2 1/s
Max Tank Pressure (t)
210 bar
Nominal Power (dc)
30 W
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (24 V Dc)
1.25 A
Throttle Insert A And B
0.8 mm (N08)
Throttle Insert P
0.8 mm (B08)
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
