Bosch Rexroth | 4WE6J6XEG24N9DLB15
4WE6J6X/EG24N9DL/B15
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DL/B15 directional spool valve belongs to the WE Directional Spool Valves series and is produced by Bosch Rexroth for controlling actuator flow in hydraulic automation systems. A high-power wet-pin solenoid provides the magnetic force needed to shift the spool quickly under load. The coil operates from a 24 V DC supply and draws 1.25 A, so drive electronics can be sized accordingly. Electrical input is limited to 30 W, keeping temperature rise low during continuous service. The coil accepts a ±10 % voltage variation, maintaining reliable shifting when supply levels fluctuate. A 100 % ED duty cycle allows the valve to remain energized indefinitely without overheating. Wiring is completed through a DL cable gland that includes an indicator light for instant status feedback. With both solenoids fitted the assembly weighs 1.95 kg, easing manual installation. The subplate connection follows ISO 4401-03-02-0-05, matching standard CETOP 3 mounting patterns.
Hydraulic ratings determine where the valve can be applied. Ports A, B, and P withstand pressures up to 350 bar, so the unit supports high-pressure circuits used in presses or die-casting machines. The tank port is limited to 210 bar, protecting return plumbing when back pressure is present. Flow capacity reaches 80 l/min in direct-current operation, allowing medium-sized actuators to move at design speed. A 1.5 mm throttle insert in port P, identified by option B15, moderates inlet flow for smoother acceleration and reduced cavitation. System fluid must achieve ISO 4406 cleanliness class 20/18/15 to prevent spool jamming and premature wear. The electrical housing is sealed to IP65, so the valve tolerates splashing liquids and airborne dust when the connector is properly installed. A concealed N9 manual override lets technicians shift the spool manually during commissioning or in power-loss situations.
Technical Specifications
Duty Cycle
100% ED
Electrical Connection
DL (Cable Gland, Indicator Light)
Hydraulic Cleanliness
ISO 4406 20/18/15
Ingress Protection
IP65
Manual Override
Concealed N9
Max Flow (dc)
80 l/min
Max Operating Pressure (a/b/p)
350 bar
Max Tank Port Pressure (dc)
210 bar
Mounting Interface
ISO 4401-03-02-0-05
Nominal Power
30 W
Rated Current (24 V)
1.25 A
Rated Voltage
24 V DC
Solenoid Type
High-Power Wet-Pin
Throttle Insert
Port P Ø 1.5 mm (B15)
Voltage Tolerance
+/- 10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
