Bosch Rexroth | 4WE6J6XEG24N9DK35LB1062SO407
4WE6J6X/EG24N9DK35L/B10/62SO407
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK35L/B10/62SO407 valve is produced by Bosch Rexroth for the WE Directional Spool Valves series. It shifts hydraulic flow paths in automated machinery and is built to size 6, matching circuits that rely on compact porting. Its subplate connection follows ISO 4401-03-02-0-05 (NFPA D03), so it fits standard manifolds without adapters. An M12 × 1 four-pole DK35L connector supplies the solenoid with 24 V DC, and a ±10 % voltage window keeps performance stable when supply levels vary. The coil draws 8 W during operation, and a 100 % duty rating lets it remain energized continuously. Surface temperature may reach 85 °C under full load, therefore cabinet airflow must keep ambient heat within limits. IP65 sealing protects the enclosure from dust ingress and low-pressure jets, supporting reliable field mounting.
The valve withstands 315 bar on pressure, A, and B ports, while the tank port tolerates 210 bar, allowing use in high-pressure loops that still require moderate return back-pressure. A maximum flow of 60 l/min can pass through the body when the spool is shifted, ensuring adequate supply to medium-size actuators. A 1.0 mm throttle insert in port P tempers inlet surge to reduce switching shock. Hydraulic oil cleanliness must meet ISO 4406 class 20/18/15 to preserve spool clearances and response time. A concealed N9 manual override gives technicians a means to shift the spool locally during setup without exposing the control to accidental operation. Correct alignment on the manifold is achieved with an ISO 8752-3 × 8-St locating hole and pin, completing the installation features required for dependable service.
Technical Specifications
Duty Cycle
100% ED
Electrical Connector
M12x1 4-Pole (DK35L)
Fluid Cleanliness
ISO 4406 20/18/15
Locating Hole And Pin
ISO 8752-3x8-St
Manual Override
Concealed (N9)
Max Coil Surface Temp
85 °C
Max Flow (dc, So407)
60 l/min
Max Operating Pressure (p/a/b)
315 bar
Max Tank Port Pressure (t)
210 bar
Mounting Interface
ISO 4401-03-02-0-05 (NFPA D03)
Nominal Power
8 W
Nominal Size
6
Nominal Voltage
24 V DC
Protection Class
IP65
Throttle Insert
1.0 mm (Port P)
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
