Bosch Rexroth | 4WE6J6XEG24N9DK35LB08SO407
4WE6J6X/EG24N9DK35L/B08SO407
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK35L/B08SO407 valve is produced by Bosch Rexroth within the WE Directional Spool Valves series. It directs hydraulic flow in automation circuits where rapid, repeatable position changes are required. The unit handles pressure up to 315 bar at ports P, A, and B, while port T is limited to 210 bar, allowing safe tank return. A maximum flow of 60 l/min supports medium-capacity actuators, and the ISO 4401-03-02-0-05 porting pattern simplifies manifold mounting. Flow stability is improved by a 0.8 mm throttle insert in port P that dampens pressure surges. Reliable operation depends on keeping the working fluid at cleanliness class 20/18/15, reducing spool wear. A concealed manual override permits local shifting during commissioning without exposing the mechanism to contamination. Continuous energization is possible because the solenoid is rated for a 100 % duty cycle, powered from a 24 V DC source that may vary within ±10 % of nominal without affecting performance.
The electromagnetic section draws 8 W at the coil and permits a surface temperature of 85 °C, parameters that guide cooling requirements inside the machine enclosure. A molded M12x1 four-pin connector provides the power interface and contributes to the IP65 rating that shields the housing from dust ingress and water jets. Control electronics can issue up to two shifts each second, matching the permitted switching frequency of 2 s⁻¹ for cyclic motion tasks. With two solenoids the assembly weighs 1.95 kg, allowing technicians to mount it directly on the manifold without supplementary brackets. These electrical, environmental, and mechanical features combine to support compact hydraulic power units and mobile installations where low thermal load, reliable sealing, and minimal mass are priorities.
Technical Specifications
Cleanliness Class (iso 4406)
20/18/15
Coil Max Surface Temperature
85 °C
Coil Power (nominal)
8 W
Connector Type
M12x1 4-pin
Duty Cycle
100%
Ingress Protection
IP65
Manual Override
Concealed
Max Operating Pressure (p,a,b)
315 bar
Max Operating Pressure (t)
210 bar
Max Switching Frequency
2 1/s
Maximum Flow (dc)
60 l/min
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Throttle Insert
Port P Ø0.8 mm
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
