Bosch Rexroth | 4WE6J6XEG24N9DK35L62-ANSO43A-1805
4WE6J6X/EG24N9DK35L/62 ANSO43A-1805
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK35L/62 ANSO43A-1805 is produced by Bosch Rexroth for the WE Directional Spool Valves series and directs hydraulic flow to selected actuator ports in automated machinery. Its solenoid coil is rated for 24 V DC and draws 1.25 A, so low-voltage control systems can operate the valve directly. Electrical input of 30 W allows the coil to build the magnetic force needed for positive spool shifting, while a 100 % duty cycle keeps the valve energized without thermal pauses during continuous operation. The pressure limit on the P, A, and B ports reaches 350 bar, letting the unit handle high-pressure circuits used in industrial presses or molding equipment. Flow capacity of 80 l/min supports medium-sized actuators without excessive pressure drop. An ANSI B93.9 porting pattern aligns the mounting face with common North American sub-plates, and an M12 × 1 four-pole connector (DK35L) provides quick electrical hookup in field wiring.
The housing carries an IP65 rating, which seals the enclosure against dust and water jets encountered on factory floors. The electrical design meets VDE protection class III, meaning only safety extra-low voltage is present at the coil. A concealed manual override (N9) lets technicians shift the spool during setup, and the override may be used while tank pressure stays below 50 bar. The T port tolerates up to 210 bar, preventing case drain surges from damaging seals. Coil insulation withstands switch-off transients up to 500 V, reducing the need for external surge suppressors. A locating hole prepared to ISO 8752-3×8-St simplifies pin alignment on the manifold block, maintaining accurate orientation. Fluid cleanliness must reach ISO 4406 class 20/18/15 so sliding surfaces remain free from abrasive particles.
Technical Specifications
Cleanliness Class
ISO 4406 (c) 20/18/15
Connector Type
M12x1 4-Pole (DK35L)
Duty Cycle
100% ED
Ingress Protection (ip)
IP65
Locating Hole Option
ISO 8752-3x8-St
Manual Override
Concealed (N9)
Manual Override Max Tank Pressure
50 bar
Max Flow (dc)
80 l/min
Max Operating Pressure (p,a,b)
350 bar
Max Switch-off Overvoltage
500 V
Max Tank Port Pressure (t, Dc)
210 bar
Nominal Power
30 W
Nominal Voltage
24 V DC
Porting Pattern
ANSI B93.9
Rated Current
1.25 A
Vde Protection Class
III
1620 Old Apex Road
Shipping & Payment Options
