4WE6J6X/EG24N9DK35L ANSO43A-1805

The 4WE6J6X/EG24N9DK35L ANSO43A-1805 directional spool valve is manufactured by Bosch Rexroth as part of the WE Directional Spool Valves series for routing pressurized fluid in hydraulic automation. Its solenoid is energized with a rated voltage of 24 V DC, while a rated current of 1.25 A defines the electrical draw placed on the control supply. A nominal power demand of 30 W helps size power distribution hardware, and a duty cycle of 100 percent ED permits continuous holding without thermal derating. The coil tolerates supply variations of ±10 percent, providing immunity to minor line fluctuations. Protection class III design keeps the control circuit within a safety extra-low voltage range, and an IP65 housing blocks dust ingress and low-pressure water jets encountered on industrial equipment. The NFPA D03 mounting pattern lets the valve bolt directly to common subplates, and the ISO 4401-03-02-0-05 porting arrangement aligns internal galleries with standardized manifold cavities.

The hydraulic section supports a maximum flow of 80 liters per minute so actuators receive sufficient volume during rapid moves. Working ports A, B, and P withstand pressures up to 350 bar, whereas the T return port is limited to 210 bar, guiding users when setting relief and back-pressure valves. A concealed manual override permits spool actuation during setup without exposing protruding hardware and remains functional up to a tank pressure of 50 bar. The assembly switches positions at a maximum rate of one cycle per second, establishing a practical upper limit for high-duty servo sequences. Each of these parameters—flow, pressure, override capability, and switching frequency—defines the operational envelope engineers consider when integrating the valve into presses, test rigs, or material-handling circuits.