Bosch Rexroth | 4WE6J6XEG24N9DK35L-AN
4WE6J6X/EG24N9DK35L AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK35L AN directional spool valve belongs to the WE Directional Spool Valves series and is produced by Bosch Rexroth for hydraulic automation tasks such as controlling actuator movement in machines and mobile equipment. It follows the ISO 4401-03-02-0-05 mounting pattern so it can be installed on widely used CETOP 03 subplates. The hydraulic paths at ports P, A, and B are rated for a maximum operating pressure of 350 bar, while the tank port tolerates up to 210 bar, allowing the valve to work in high-pressure circuits with a safe return line. A flow capacity of 80 l/min in direct current operation supports medium-sized systems, and the spool may shift once per second, giving a maximum switching frequency of 1 Hz for repeatable actuation. A concealed manual override labeled N9 permits local shifting during commissioning or service without removing protective covers.
Electrical data are based on a 24 V DC coil that accepts a ±10 % voltage band, drawing a rated current of 1.25 A and consuming 30 W during steady energization. The solenoid is specified for a 100 % duty cycle, so continuous holding does not overheat the coil. Internal suppression must account for a switch-off overvoltage that can reach 500 V when the field collapses. Connection is made through an M12×1 four-pole plug, simplifying cable assembly in modular manifolds. An IP65 enclosure rating keeps dust ingress and low-pressure water jets from reaching internal parts, supporting outdoor or wash-down installations. The complete assembly with two solenoids weighs 1.95 kg, giving a manageable load for manifold mounting or service replacement.
Technical Specifications
Connector Type
M12x1, 4-Pole
Duty Cycle
100% ED
Enclosure Rating
IP65
Manual Override
Concealed (N9)
Max Flow (dc)
80 l/min
Max Operating Pressure (p, A, B)
350 bar
Max Switch-off Overvoltage
500 V
Max Switching Frequency (dc)
1 1/s
Max Tank Port Pressure (t)
210 bar
Mounting Pattern
ISO 4401-03-02-0-05
Nominal Power
30 W
Nominal Voltage
24 V DC
Rated Current (24 V Dc)
1.25 A
Valve Weight (two Solenoids)
1.95 kg
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
